FN3100-80-35

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules are devices primarily designed to minimize electromagnetic interference (EMI) and radio frequency interference (RFI). The FN3100-80-35 is such a device used for applications in electrical circuits to reduce electric current and current induced electro-magnetic noise. This device filters out interference signals from other devices, electric appliances, etc., while allowing the main signal of the current to flow unhindered.

The FN3100-80-35 is constructed using various components such as inductance coils, resistors and capacitors. It usually includes a bypass capacitor that allows for alternating current to bypass the filter when it is turned off, and another capacitor that allows for current filtering when the filter is turned on. The inductance coils have an important role in propagating the signal properly, and the resistors act as impedance elements. The capacitors filter out high frequency interferences, such as those induced by radio frequency waves. The FN3100-80-35 also contains a ferrite core that increases inductive impedance in the circuit.

The FN3100-80-35 is typically used in applications such as motor control, power conditioning, and power supply line attenuation. It is designed for a current rating of forty amps and a voltage rating of eighty Volts. The FN3100-80-35 includes an integrated ground lead that allows proper grounding of the power line filter.

The FN3100-80-35 can be installed in either single or three-phase systems. In a three-phase system, the FN3100-80-35 can be connected to all three of the lines. The device is also designed to work with any of the common inductive or resistive loads that are typically found in an industrial environment.

The FN3100-80-35 operates by forming an electromagnetic field around the device that captures any incoming electrical or radio frequency interference. The uniquely designed components of the device capture and neutralize any interferences that pass through. This helps ensure the main signal passes through the line filter unhindered, and allows for the safe operation of the circuit.

In conclusion, the FN3100-80-35 is a power line filter module designed to reduce electric current and current induced electro-magnetic noise. It is typically used in motor control, power conditioning, and power supply line attenuation applications and can be installed in single or three-phase systems. The device is designed to filter out high frequency interferences, while allowing the main signal of the current to flow unhindered.

The specific data is subject to PDF, and the above content is for reference