FN5010-32-99

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Line Filter Modules are designed to protect electronics from power line interference coming from either an external source or generated by the device itself. The FN5010-32-99 is a DC Powerline Filter Module, designed to reduce the amount of high- frequency electromagnetic interference that can be generated by a DC powerline system. This module is designed to reduce symmetrically up to 32 dB of power line noise in the 30 Hz-300 KHz frequency range.

The FN5010-32-99 is designed to be highly efficient and reduce the amount of electrical noise generated by the system. This module is built using a combination of passive components, such as inductors and capacitors, which are wired in configurations to reduce the high-frequency interference. The FN5010-32-99 is a three-phase filter that uses two identical filter cells per phase, with each filter cell configuration consisting of two separate high-frequency stages.

The first stage of the filter cell is designed to reduce low-frequency interference, while the second stage focuses on attenuating higher frequencies. The combination of these two stages is what makes the FN5010-32-99 so efficient in reducing powerline noise, as it is designed to reduce both the lower and higher frequencies of interference.

In addition, the FN5010-32-99 uses shielded inductors and capacitors to reduce the amount of radiated interference that is emitted from the device. This helps to further reduce the amount of unwanted EMI from the system.

Furthermore, the FN5010-32-99 is designed to be easy to install. It is a plug-in module, allowing for easy wiring and mounting. It has an operating temperature range of -20 to +85 degrees Celsius, making it suitable for both indoor and outdoor applications. The module is also UL 1561 approved, meaning that it meets all safety requirements for use in industrial applications.

To sum up, the FN5010-32-99 is designed to effectively reduce the amount of EMI from DC powerline systems. It is built using a combination of high-frequency inductors and capacitors, and shielded components to reduce radiated interference. The module is easy to install and has an operating temperature range of -20 to + 85 degrees Celsius, making it suitable for a wide range of applications. The module is UL 1561 approved, ensuring it meets all safety requirements for use in industrial settings.

The specific data is subject to PDF, and the above content is for reference