Allicdata Part #: | FN6000035-ND |
Manufacturer Part#: |
FN6000035 |
Price: | $ 3.31 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Diodes Incorporated |
Short Description: | OSCILLATOR XO 60.000MHZ CMOS SMD |
More Detail: | 60MHz XO (Standard) CMOS Oscillator 3.3V Enable/Di... |
DataSheet: | FN6000035 Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 2.97675 |
Frequency Stability: | ±25ppm |
Current - Supply (Disable) (Max): | 100µA |
Height - Seated (Max): | 0.071" (1.80mm) |
Size / Dimension: | 0.276" L x 0.197" W (7.00mm x 5.00mm) |
Package / Case: | 4-SMD, No Lead |
Mounting Type: | Surface Mount |
Ratings: | -- |
Current - Supply (Max): | 40mA |
Operating Temperature: | -20°C ~ 70°C |
Series: | SaRonix-eCera™ FN |
Voltage - Supply: | 3.3V |
Output: | CMOS |
Function: | Enable/Disable |
Frequency: | 60MHz |
Type: | XO (Standard) |
Base Resonator: | Crystal |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The FN6000035 oscillator is primarily employed in orders that involve the use of high-frequency microwave signal noise cancellation. This device works by creating two signals with a specific phase difference, and then superimposing the waves together in certain ways to create and control the cancellation feedthrough. The oscillator is also designed to maintain a constant phase differential, helping to make it reliable and effective in a number of applications, including wireless communication and radio transmission.
The oscillator, or any other device like it, is used to create and maintain a high-frequency microwave signal. To do this, the oscillator works by combining two sinusoidal waves that have a different phase difference. This allows for the cancellation of feedthrough due to the difference in dominant phase alignment of the waves. The amplitude of the final wave is affected by the amplitude of the two input waves and the phase differential of these waves as well.
The oscillator is built with two basic components: an oscillator chip and an amplifier. The oscillator chip consists of an inductor, a capacitor, and a few resistors, and the amplifier helps the oscillator chip to maintain the desired oscillating frequency. The amplifier works by taking in a varying signal input and producing an output that is at the same frequency. This signal is then sent to the oscillator chip to create the two noise-canceling waves.
The oscillator is also designed to maintain a constant phase differential. This is achieved by the use of a feedback loop, in which the signal from the amplifier is fed back to the oscillator chip and adjusted to maintain the desired phase differential. The feedback loop helps to keep the oscillator functioning at its optimal frequency and avoids any undesired, uncontrolled frequency shifts.
Due to the ability to produce a stable phase differential, the FN6000035 oscillator holds advantages over other types of oscillators. This type of oscillator is able to provide very reliable and effective signals that are useful for a variety of applications, including wireless communication, broadcasting, and radio transmission. The device is also capable of producing very low noise levels due to the noise cancellation capabilities.
The FN6000035 oscillator is a valuable tool for applications that need to produce and control noise cancellation, especially in the high-frequency microwave range. Its ability to maintain a constant phase differential enables it to provide reliable and effective signals for a variety of applications. Its low noise characteristics make it a valuable tool for wireless communication, broadcasting, and radio transmission.
The specific data is subject to PDF, and the above content is for reference
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...