FN6660068

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are electronic circuits that produce a continuous and periodically repeating higher frequency waveform. Oscillators are used in a variety of applications including communication, signal processing, instrumentation control, computer processing, and power generation. The most common application of oscillators is for radio communications.

FN6660068 Application Field and Working Principle

The FN6660068 is a resonant, advanced oscillator that is made from a combination of distributed components including crystals, coils, resistors, and transistors. It generates a steady and accurate signal within a range of frequencies that cover from 10MHz to 500MHz band edges. FN6660068 oscillators are used for frequency transducers, function generators, signal generators, data acquisition systems, frequency synthesizers and high speed computers.

The FN6660068 has a wide RF frequency range of up to 500MHz. This oscillator has an extensive data-set including frequency, amplitude, power supply voltage, capacitance, frequency tolerance and noise characteristics. It is designed to provide a highly stable output signal over a wide range of temperatures and environmental conditions. The FN6660068 is a customizable device enabling the user to adjust the output parameters such as the frequency, amplitude, phase, and voltage output.

The FN6660068 oscillator is based on a Pierce oscillator topology and is designed to provide a highly stable signal output over a wide range of frequency and temperature variations. The oscillator uses two crystal resonators that are connected in parallel and the oscillation frequency can be chosen by selecting which of the parallel resonators receives the applied signal. The system can also adjust the phase of the output signal by controlling the current level in the resonators.

The FN6660068 has two outputs - high frequency and low frequency. The high frequency output is generated using a Pierce oscillator and the low frequency output is generated using a transconverter circuit. The high frequency output is used to drive the crystal generates and is then fed back to the input of the Pierce oscillator to maintain oscillation. The low frequency output is used to drive the external device or process.

The FN6660068 uses both positive and negative bias voltages to control the requisite parameters such as frequency, output level, voltage swing, and drive level. The bias voltages can be adjusted to vary the output parameters. The device also uses a feedback loop to improve accuracy and noise cancellation.

Pulse width modulation (PWM), or Binary Pulse Width Modulation (BPWM), technology is also used in FN6660068 oscillators. This technology is used to control the width and duty cycle of the pulse output wave and it is used to set the output frequency and amplitude. along with the control circuit, the BPWM technology is used to control the amount of power provided to the output terminal.

The FN6660068 has an extensive set of features that enable it to be used for a variety of applications. Its output can be configured to provide a continuous output signal or it can be modified to provide a saw-tooth, triangular or square wave, eliminating the need for external signal shaping. It can also be used as a frequency source for audio circuits, providing simple digital waveforms or analog burst signals to external circuits.

Overall, the FN6660068 is a sophisticated oscillator with extensive performance characteristics and advanced capabilities, enabling it to be used in a wide range of applications. Its versatility and configurability, together with its high performance make it ideal for a range of applications. Its continued evolution is ensuring that it remains at the forefront of oscillator technology.

The specific data is subject to PDF, and the above content is for reference