Allicdata Part #: | 817-1230-ND |
Manufacturer Part#: |
FN670-1.8-06 |
Price: | $ 18.98 |
Product Category: | Filters |
Manufacturer: | Schaffner EMC Inc. |
Short Description: | LINE FILTER 250VAC 1.8A CHASS |
More Detail: | N/A |
DataSheet: | FN670-1.8-06 Datasheet/PDF |
Quantity: | 5 |
1 +: | $ 17.25570 |
Series: | FN 670 |
Part Status: | Obsolete |
Filter Type: | Single Phase |
Configuration: | Two Stage |
Voltage - Rated DC: | -- |
Voltage - Rated AC: | 250V |
Current: | 1.8A |
Frequency - Operating: | DC ~ 400Hz |
Applications: | General Purpose |
Approvals: | CSA, ENEC, UR |
Operating Temperature: | -- |
Mounting Type: | Chassis Mount |
Termination Style: | Quick Connect |
Inductance: | 7.2mH |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Power Line Filter Modules are designed for use in a variety of applications where protection from the effects of electromagnetic interference (EMI) and radio-frequency interference (RFI) is needed. The FN670-1.8-06 Power Line Filter Module is one such product, designed specifically for applications that require an enhanced level of protection. This power line filter module is suitable for use in an array of connected devices, ensuring that the devices are protected from interference that could otherwise cause loss of data or incorrect functioning of the device.
The FN670-1.8-06 Power Line Filter Module utilizes an inductive coil and capacitor arrangement, which together act to form a low-pass filter. The FN670-1.8-06 provides two levels of filtering; it is designed to achieve over-current protection, and also to limit high frequency noise and interference that may be present in the input power source. The module also features a thermal fuse, which is designed to protect the module in the event of a current surge.
The FN670-1.8-06 Power Line Filter Module features two poles, labeled A and B respectively. Pole A is designed to provide deep filtering on the input power line, while Pole B is designed to provide noise suppression on the output power line. The filter module is designed to provide up to 23 dB of insertion loss at frequencies as low as 0.1 MHz. The module also features a maximum leakage current of 4 mA and a minimum operating voltage of 5 Vdc.
In addition to providing a high level of EMI and RFI protection, the FN670-1.8-06 Power Line Filter Module also provides increased levels of safety and protection against accidental overloads or short circuits. The module is designed for use in a variety of applications, ranging from consumer electronics to industrial equipment. For example, the FN670-1.8-06 Power Line Filter Module can be used to protect devices that are connected to the same power line, such as a laptop and a printer, or two computers connected to the same power strip.
The addition of power line filtering provides greater protection from interference, and also helps to ensure the efficiency of the connected devices. The module is designed to provide improved power savings, and its use helps to reduce the strain on the connected devices, allowing them to function at their peak levels more reliably.
The FN670-1.8-06 Power Line Filter Module is designed to provide superior levels of protection from EMI and RFI interference, while also providing increased safety and protection against short circuits and surges. This power line filter module is ideal for use in a variety of connected devices, helping to ensure that the devices are protected from interference, and that the connected devices are performing at their peak levels.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
FN670-3-06 | Schaffner EM... | 0.0 $ | 1000 | LINE FILTER 250VAC 3A CHA... |
FN670-6-06 | Schaffner EM... | 0.0 $ | 1000 | LINE FILTER 250VAC 6A CHA... |
FN670-10-06 | Schaffner EM... | 0.0 $ | 1000 | LINE FILTER 250VAC 10A CH... |
FN670-1.8-06 | Schaffner EM... | 18.98 $ | 5 | LINE FILTER 250VAC 1.8A C... |
PN-FN672/E2M | Lattice Semi... | 0.7 $ | 1000 | ADAPTER 672FBGA LATTICEEC... |
PN-FN672/E2 | Lattice Semi... | 0.7 $ | 1000 | ADAPTER 672FBGA LATTICEEC... |
LINE FILTER 250VAC 20A CHASS MNT
LINE FILTER 125/250VAC 4A TH
LINE FILTER 500VAC 100A CHASSIS
LINE FILTER 480VAC 50A CHASS MNT
LINE FILTER 480/520VAC 36A CHASS
LINE FILTER 480VAC 65A CHASS MNT