FO5HSCBE48.0-T1 Crystals, Oscillators, Resonators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

FO5HSCBE48.0-T1 is a frequency oscillator, which is also known as an electrical oscillator, and is a circuit that produces periodic electrical signals with certain characteristics. This particular oscillator is designed to work up to 49.152MHz in the 3.3V operating range, and is extremely stable and compact.

Application Field

FO5HSCBE48.0-T1 is mainly used in the fields of consumer electronics, industrial control, networks, etc., such as satellite receivers, WiFi modules, video surveillance equipment, base station machines, medical instruments, etc. In addition, it can also be used in test and measurement equipment and interface applications.

Working Principle

FO5HSCBE48.0-T1 is based on a stable Colpitts oscillator topology, where the input voltage is converted into an AC voltage waveform at the resonant frequency, which is then output through the output port. It has a wide tuning range, low phase noise, fast start-up, and high reliability.

The output of the FO5HSCBE48.0-T1 is provided by the high-frequency feedback loop.This oscillator is also based on the VCO (Voltage Controlled Oscillator). It consists of two feedback amplifiers connected in parallel, and a voltage-controlled capacitor that is used to determine the frequency of the oscillator.

The first amplifier has a gain of one, while the second amplifier has a gain of minus one. This gain is critical in maintaining the oscillations. When the signal generated is applied to the feedback loop, it is multiplied by the gain of the two feedback amplifiers. This produces a sinusoidal waveform.

The oscillation frequency of the FO5HSCBE48.0-T1 is determined by the values of the voltage-controlled capacitor. Depending on the input voltage, the capacitor values of the oscillator can change slightly. This change in capacitance causes the frequency of the oscillator to change slightly. This feature makes the FO5HSCBE48.0-T1 very stable and precise.

In addition to the voltage-controlled capacitance, the FO5HSCBE48.0-T1 also has a high-frequency feedback loop that boosts the signal amplitude. This loop consists of an amplifier, a low-pass filter, an isolation resistor, and a PLL (phase-locked loop). This loop helps to maintain the output at a consistent level as well as keeping the frequency of the oscillator stable.

The PLL uses signals from the oscillator and compares them to a reference signal. It then adjusts the phase of the oscillator signal so that it remains in phase with the reference signal. This helps the FO5HSCBE48.0-T1 to remain stable and generate a consistent signal.

The FO5HSCBE48.0-T1 is a very reliable frequency oscillator. It is designed to work up to 49.152MHz in the 3.3V operating range and is extremely stable and compact. It is extremely efficient and uses very little power. It is an ideal choice for consumer electronics, industrial control, networks and other applications.

The specific data is subject to PDF, and the above content is for reference