FP0705R3-R18-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inductors are a common form of electrical component. They act as a magnet that can be used to store electrical energy as a coil of wire. Fixed inductors are a type of inductor that has a fixed inductance, meaning that the amount of inductance remains constant regardless of the current passing through it. The FP0705R3-R18-R is one type of fixed inductor, and its applications and working principle will be discussed in this article.

The FP0705R3-R18-R is an inductor designed for use in high frequency circuits, such as radio frequency circuits, where a relatively small inductance is required. It is a surface mount inductor, meaning that it has a small form factor and can be mounted directly onto a printed circuit board. The device has a maximum diameter of 0.7mm and a maximum height of 0.5mm, making it suitable for use in compact designs.

The FP0705R3-R18-R has an inductance range of 0.37μH to 0.39μH, and a maximum current rating of 250mA. This makes it suitable for applications such as DC/DC power conversion and high-frequency filtering. The device is constructed from high-temperature ferrite material, which gives it a high saturation current rating and a high self-resonant frequency.

The working principle of the FP0705R3-R18-R is the same as any other inductor. It consists of a coil of wire, known as the inductor coil, which is surrounded by a magnetic field. When a current flows through the coil, it generates a magnetic field, which interacts with the magnetic field of the inductor to create a voltage across the terminals. This voltage is known as the induced voltage, and it is proportional to the rate of change of the current. This means that when a current is applied to the inductor, it will generate a voltage, and when the current is removed, the voltage will decrease.

The FP0705R3-R18-R is an ideal component for use in high frequency circuits, where a small inductance is required. It has a small form factor, a high saturation current rating, and a high self-resonant frequency. This makes it suitable for use in DC/DC power conversion and high-frequency filtering applications.

The specific data is subject to PDF, and the above content is for reference