FPF1013

Voltage - Supply (Vcc/Vdd):	Not Required
Base Part Number:	FPF1013
Supplier Device Package:	6-WLCSP (0.96x1.66)
Package / Case:	6-UFBGA, WLCSP
Operating Temperature:	-40°C ~ 85°C (TA)
Fault Protection:	--
Features:	Load Discharge, Slew Rate Controlled
Input Type:	Non-Inverting
Rds On (Typ):	17 mOhm
Current - Output (Max):	1.5A
Series:	IntelliMAX™
Voltage - Load:	0.8 V ~ 1.8 V
Interface:	On/Off
Output Type:	N-Channel
Output Configuration:	High Side
Ratio - Input:Output:	1:1
Number of Outputs:	1
Switch Type:	General Purpose
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Power Management Integrated Circuit (PMIC) is an essential part of modern day circuit applications. PMICs are used in a wide range of applications to reduce power consumption, improve efficiency and interface with a variety of components. One of the most widely used PMICs is the FPF1013, which is a power distribution switch, load driver and power management IC. In this article, the working principle and application field of the FPF1013 are discussed.

Working Principle

The working principle of the FPF1013 is based on the concept of power-on reset, which is achieved by controlling the power supply of the device. The main power supply is the input voltage, while the control voltage is the voltage generated by the internal PFET. The FPF1013 is able to regulate the power supply by using a combination of pull-up and pull-down PFET transistors.The FPF1013 is a single-chip power management IC, which contains a full range of power management features. It is capable of controlling the supply and delivery of current and voltage, as well as providing protection for the circuit. The FPF1013 also supports a low voltage start-up capability and low power operation in the range of 0 to 1.8V and 100µA respectively.

Features

The FPF1013 power management IC provides a variety of features to simplify circuit design and improve system performance. It is capable of operating up to 5A, offers additional protections like short circuit and over-temperature, as well as features two output operating modes: light load mode and high load mode.The light load mode is used when the power consumption is low (e.g. in standby mode) while the high load mode is used to increase the output power of the device in cases when the power consumption of connected components is high.

Application Field

The FPF1013 is a versatile power management IC and can be used in a variety of applications. It is predominantly used in consumer electronics, portable devices and automotive applications.In consumer electronics, it is used in products such as TVs, set top boxes, gaming consoles and other portable devices. In automotive applications, the FPF1013 is well suited for controlling power in the ECU, windshield wiper systems and other car accessories.

Conclusion

The FPF1013 is a versatile power management IC. It is a single-chip solution capable of controlling the supply and delivery of current and voltage, as well as offering protection features like short circuit and over-temperature. The FPF1013 can be used in a variety of consumer electronics, portable devices and automotive applications. It is an essential part of modern day circuits and offers reliable performance with minimum power consumption.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description