Allicdata Part #: | 725-1254-ND |
Manufacturer Part#: |
FSP10A30 |
Price: | $ 80.57 |
Product Category: | Sensors, Transducers |
Manufacturer: | Cynergy 3 |
Short Description: | FLOW SWITCH FOR DIRECT SWITCH |
More Detail: | Liquid Flow Sensor 0 ~ 80 LPM 1.0" (25.4mm) BSP Po... |
DataSheet: | FSP10A30 Datasheet/PDF |
Quantity: | 2 |
1 +: | $ 73.24380 |
Series: | -- |
Part Status: | Active |
Sensing Range: | 0 ~ 80 LPM |
Flow Sensor Type: | Liquid |
Voltage - Input: | 250VAC |
Port Size: | 1.0" (25.4mm) BSP |
Switch Function/Rating: | SPDT |
Material - Body: | Polyamide |
Operating Temperature: | 85°C (TA) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The FSP10A30 is a general-purpose differential pressure flow sensor, and is one of the most common flow sensors in the Flow Sensors category. It can be used for measuring, regulating and controlling of air and gases.
The FSP10A30 has a wide range of applications. It is used in many industries such as automotive, aerospace, medical, HVAC, and process automation. It can also be used for measuring flow in pipes, tanks, reactors and other systems. Additionally, it is also used in the monitoring and control of energy systems, water systems, and water treatment plants.
The working principle of the FSP10A30 is based on the Bernoulli and Torricelli principles of fluid flow. When the fluid flowing through the sensor comes in contact with a pressure sensing element, the pressure produced by the fluid flow is detected. This pressure is then converted into an electrical signal by the sensor. The electrical signal is then used to provide an output voltage or current that is proportional to the flow rate of the fluid.
The FSP10A30 is a highly reliable and accurate flow sensor. It has a wide range of applications across a number of industries, and can be used with various types of fluid media. It is also very easy to install and can be used in both hazardous and non-hazardous areas. The FSP10A30 is also designed to be low maintenance and requires no calibration or adjustment.
In conclusion, the FSP10A30 is a general-purpose differential pressure flow sensor, and is an important component in the Flow Sensors family. It is used widely in industries across the globe, and is known for its accuracy and reliability. The working principle of the FSP10A30 is based on the Bernoulli and Torricelli principles of fluid flow, and it can be used with various types of fluid media. In addition, the FSP10A30 is very easy to install and requires no calibration or adjustment.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
FSP150KB-39R | Yageo | 1.09 $ | 1000 | RES 39 OHM 1.5W 10% AXIAL... |
FSP120KB-4R7 | Yageo | 1.17 $ | 1000 | RES 4.7 OHM 1.2W 10% AXIA... |
FSP120KB-1K5 | Yageo | 1.24 $ | 1000 | RES 1.5K OHM 1.2W 10% AXI... |
4S1-FSP1-M6RE | Carling Tech... | 2.91 $ | 998 | SWITCH SLIDE SPDT 0.4VA 2... |
FSP100DRY | Chemtronics | 6.18 $ | 1000 | WIPES DRY MULTI SURFACE 1... |
FSP10A30 | Cynergy 3 | 80.57 $ | 2 | FLOW SWITCH FOR DIRECT SW... |
FSP10A06 | Cynergy 3 | 80.57 $ | 1000 | FLOW SWITCH FOR DIRECT SW... |
4S1-FSP1-M2RE | Carling Tech... | 2.65 $ | 1000 | SWITCH SLIDE SPDT 0.4VA 2... |
MEMS FLOW AND PRESSURE MODULEGas Flow Se...
SENSOR AIRFLOW 1.0 SLPMAir Flow Sensor 1...
FLOW SWITCH--MR-W1-PFlow Sensor 1 ~ 30 L...
G5/4" WATER FLOW SENSORLiquid Flow Senso...
G1" WATER FLOW SENSORLiquid Flow Sensor ...
FLOW SENSOR MEMSGas Flow Sensor 0 ~ 2 LP...