Allicdata Part #: | FSSA101005RNN00S-ND |
Manufacturer Part#: |
FSSA101005RNN00S |
Price: | $ 0.62 |
Product Category: | Filters |
Manufacturer: | Murata Electronics North America |
Short Description: | FERRITES |
More Detail: | Ferrite Core ID OD Length |
DataSheet: | FSSA101005RNN00S Datasheet/PDF |
Quantity: | 1000 |
10000 +: | $ 0.55991 |
Series: | FSSA |
Part Status: | Active |
Type: | Flat |
Design: | -- |
Impedance @ Frequency: | -- |
Material: | RN |
Inner Dimension: | -- |
Outer Dimension: | -- |
Ratings: | -- |
Mounting Type: | -- |
Length: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Ferrite Cores - Cables and Wiring
Ferrite cores are composed of iron oxide and other materials and are used in a variety of applications for the purpose of controlling signal or power. FSSA101005RNN00S is a type of ferrite core which is specifically designed for the control of EMI/RFI emissions in applications requiring high-frequency performance. This type of ferrite core is commonly used for cables and wiring, as it is able to effectively reduce electromagnetic interference (EMI) between two separate lines.
When dealing with EMI/RFI shielding, the ferrite core acts as a capacitor which is able to absorb and dampen electromagnetic radiation. This helps control the effect of EMI and RFI radiation. The core is also able to provide electrical and physical isolation for cables and wires in order to reduce the effects of interferences. The FSSA101005RNN00S ferrite core is specifically designed with high-frequency performance in mind, and is able to provide excellent isolation of EMI and RFI interference over a wide range of frequencies.
FSSA101005RNN00S ferrite cores are most commonly used for high-frequency cables and wiring applications, such as data communication cables and radio frequency (RF) circuits. In order to achieve the best results, ferrite core sizing must be carefully taken into consideration, as too small a core will not be able to provide sufficient shielding and too large a core will cause an excessive amount of power dissipation, resulting in excessive heating.
In order to properly use an FSSA101005RNN00S ferrite core for high-frequency cables and wiring, attention must be paid to the suface area of the core material. The surface area should be kept as large as possible so as to allow for better absorption of EMI and RFI. Additionally, the core material should have a high quality finish to ensure that EMI/RFI absorption is not compromised. The core should also be carefully placed in order to reduce the distance between the components and wires, as this will reduce the amount of radiation transfer that occurs.
Finally, the capacitance of the ferrite core should be as close as possible to the desired capacitance. Proper capacitance matching is essential for optimal results, as too high of a capacitance will cause excessive EMI/RFI leakage, while too low of a capacitance will limit EMI/RFI absorption.
In conclusion, FSSA101005RNN00S ferrite cores are used for the control of EMI/RFI emissions in high-frequency cables and wiring applications. The core should be carefully sized and placed in order to ensure optimum performance. Additionally, the surface area of the core material, capacitance of the core, and the core’s quality of finish should all be taken into consideration.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
FSSA101005RNN00S | Murata Elect... | 0.62 $ | 1000 | FERRITESFerrite Core ID ... |
FSSA101005RNN30S | Murata Elect... | 0.62 $ | 1000 | FERRITESFerrite Core ID ... |
FSSA151005RNN30S | Murata Elect... | 0.76 $ | 1000 | FERRITESFerrite Core ID ... |
FSSA151005RNN00S | Murata Elect... | 0.78 $ | 1000 | FERRITESFerrite Core ID ... |
FERRITE CORE PRESS FITFerrite Core ID ...
FERRITE CORE 170 OHM SOLID 8MMSolid Free...
FERRITE 31OHM HINGED 52X1.5MMHinged (Sna...
FERRITE 250OHM HINGED 52X1.50MMHinged (S...
FERRITE 188OHM SOLID 10.21MMSolid Cable ...
FERRITE CORE 280 OHM CLIPClip Together (...