FT63EH203

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Trimmer Potentiometers are a kind of adjustable electronic components that can provide a control to adjust the electrical performance of a circuit.FT63EH203 is a type of trimmer potentiometer, which is widely used in various kinds of applications. This paper will discuss the application field and working principle of FT63EH203.

FT63EH203 is a Single-turn Cermet Trimmer Potentiometer. It is small in size, with a dimension of 6.3 x 6.3 mm and a mounting pitch of 3.9 mm. It is usually used for applications such as automatic adjustment of the operating voltage or current of the circuit, and manual adjustment in the adjustment of the frequency of the oscillating circuit. It is also used in other applications, such as for controlling gain, offset, evaluation, and other adjustment parameters.

FT63EH203 has a Contact resistance of 190 Ohms-500 Ohms, Insulation resistance of 19 MOhms min at 250V DC, Operating Temperature range of -55°C to +125°C, Rated power of 0.5W, Operating voltage of 50V DC, Rotational life of 30,000 cycles, Termination type of PC Pins, and Terminals material of Copper Alloy.

The working principle of FT63EH203 is based on the basic principle of resistors. The potentiometer consists of two or three electrical contacts, one of which is a movable contact, and the other is a fixed contact, and the third is an optional contact. Depending on the application, the size of these contacts can vary, but usually they are small and compact. When in use, the movable contact is connected to an electrical component, such as a resistor, and the position of the movable contact is adjusted to change the amount of resistance of the resistor. By changing the amount of resistance of the resistor, the electrical performance of the circuit can be modified accordingly.

In conclusion, FT63EH203 is a type of trimmer potentiometer, which is widely used for various applications that require manual adjustment in the performance of a circuit. It is small in size, with a dimension of 6.3 x 6.3 mm and a mounting pitch of 3.9 mm, and its working principle is based on the basic principle of resistors. It can be used for the adjustment of the frequency of the oscillating circuit, for controlling gain, offset, evaluation, and other adjustment parameters. It has a Contact resistance of 190 Ohms-500 Ohms, Insulation resistance of 19 MOhms min at 250V DC, Operating Temperature range of -55°C to +125°C, Rated power of 0.5W, Operating voltage of 50V DC, Rotational life of 30,000 cycles, Termination type of PC Pins, and Terminals material of Copper Alloy.

The specific data is subject to PDF, and the above content is for reference