Allicdata Part #: | FUGT3-10-ND |
Manufacturer Part#: |
FUGT3-10 |
Price: | $ 329.87 |
Product Category: | Sensors, Transducers |
Manufacturer: | Carlo Gavazzi Inc. |
Short Description: | TB 1.0/2.9 M3 GLASS FIBER 1M |
More Detail: | N/A |
DataSheet: | FUGT3-10 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 299.88000 |
Series: | -- |
Part Status: | Active |
Accessory Type: | Fiber Optic Cable |
For Use With/Related Products: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
FUGT3-10 is a special accessory which can be used in a number of applications and can provide a cheap, economical and efficient solution for the tasks at hand. This device is designed in compliance with the following principles and provides efficient work for the tasks that require to be done.
Working Principle
FUGT3-10 uses the principle of capacitive-resistive switching. That is, when current is applied to this type of device, its contacts form a resistive circuit which draws the current away from the load. To this circuit, a capacitor is connected, which accumulates energy as it is charged and then discharges it when the current is switched off. This causes the contacts of the device to be briefly open, thus switching off the load.
This system has a number of advantages. It is more efficient than a purely resistive system, as it does not dissipate wasted energy in the form of heat. It also allows the load to be switched off at precise predetermined intervals since the capacitor can be charged with a precise amount of energy. Finally, the system is also cost effective as the capacitor used is usually inexpensive.
Application Field
FUGT3-10 is mainly used in application fields such as lighting control, power conversion, industrial automation and HVAC systems. It is designed to switch the load automatically with a minimum of time delay. This allows for precise control of the load and a wide range of applications.
In lighting control, FUGT3-10 is usually used to switch the lighting load automatically when a certain light level is reached. This allows for efficient lighting control, saving on electrical energy. It is also used in industrial automation to control the speed of motor drives, and in HVAC systems to regulate the air flow.
FUGT3-10 is also used in power conversion, where it is employed to control the power flow to a load. This allows for efficient use of energy while ensuring that the load is always appropriately powered. It is often used in conjunction with other accessories such as overload protectors, power factor controllers and phase reversal relays.
FUGT3-10 is an important accessory for many applications that require precise, automatic switching of a load. Its efficient working principle and cost-effectiveness makes it suitable for a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
FUGT4-10 | Carlo Gavazz... | 244.63 $ | 1000 | TB 1.0/2.9 M4 GLASS FIBER... |
FUGT4-20 | Carlo Gavazz... | 273.04 $ | 1000 | TB 1.0/2.9 M4 GLASS FIBER... |
FUGT3-10 | Carlo Gavazz... | 329.87 $ | 1000 | TB 1.0/2.9 M3 GLASS FIBER... |
FUGT3-20 | Carlo Gavazz... | 367.29 $ | 1000 | TB 1.0/2.9 M3 GLASS FIBER... |
FUGT4-10/A | Carlo Gavazz... | 367.29 $ | 1000 | TB 1.0/2.9 M4 GLASSFIBER1... |
FUGT4-20/A | Carlo Gavazz... | 400.55 $ | 1000 | TB 1.0/2.9 M4 GLASS 2M |
FIBER REFLECT 1.25 M4 2M
MS46 WELD SHIELD 785MM
PANEL MOUNT ASSEMBLY HARDWARE
8CH CONN I/O EXTENSION UNIT
FRONT PROTECT COVER FOR SF4A
CABLE SOCKET 5-POLE M12 STRAIGHT