FUTD4-20

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FUTD4-20 application field and working principle

Accessories

The FUTD4-20 is an output device with multiple uses in the form of a terminal assembly. It is a 4-pin connector and is typically used in industrial automation applications, such as in the control of light, heat, air-conditioning, and the like. This device is most commonly used for controlling linear actuators, such as valves.

The FUTD4-20 works with a 4-20mA current signal because it is a two-wire current-loop interface, meaning that a simple two-wire cable can provide power for the device and control the current level to the device at the same time. The FUTD4-20 output ranges from 4mA to 20mA according to the controlling signal applied to its input terminal.

The advantage of the FUTD4-20 is its ability to provide uniform signal levels despite the typical problem of voltage and current drops in long cable runs. The output of the FUTD4-20 is also adjustable so that it is easy to achieve an ideal current level for each particular application. Although the cable length should be kept within certain limits in order to ensure accuracy, properly designed loops can be extended across long distances.

The FUTD4-20 is mainly used in the following fields:

• Engineering applications: The FUTD4-20 is often used in engineering applications such as pumps, motors, motors with brakes, vacuum systems, and combustion systems.
• Industrial automation: The FUTD4-20 is often used in industrial automation applications such as HVAC systems, linear actuators, and control valves.
• Safety systems: The FUTD4-20 is often used in safety systems such as access control panels, fire protection systems, and security monitoring systems.
• Measurement instruments: The FUTD4-20 is often used in measurement instruments to control signal processing, data acquisition, and other control requests.
• Test and measurement equipment: The FUTD4-20 is often used in test and measurement equipment such as vibration-monitoring systems and storage devices.

In order to use the FUTD4-20, an operator must first connect the two leads of the device to a source and then provide the device with a control signal. The control signal can be a digital signal that is sent through the two-wire cable, or it can be an analog signal that is sent to a separate control device. The control device then converts the analog signal into a digital signal that is sent to the FUTD4-20. Once the FUTD4-20 is given the control signal, it then sends out a four-milliamp to twenty-milliamp current signal that is consistent with the input signal.

Overall, the FUTD4-20 is an output device with multiple uses. It is well-suited for engineering applications such as pumps, motors, and other machinery, as well as for industrial automation applications such as valves and HVAC systems. It is also suited for safety systems such as access control panels, fire protection systems, and security monitoring systems. Finally, it is well-suited for test and measurement equipment as well as measurement instruments.

The specific data is subject to PDF, and the above content is for reference