FW30A5R10JA

Series:	FWxxA
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	5.1 Ohms
Tolerance:	±5%
Power (Watts):	3W
Composition:	Wirewound
Features:	Fusible, Safety
Temperature Coefficient:	±200ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.256" Dia x 0.630" L (6.50mm x 16.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are the oldest and most widely used resistors today. They have been around since the early 1920s and have been widely adopted in many electronic systems and components since then. While newer and more modern technologies have been developed over the years, through hole resistors remain popular due to their low cost, simplicity and durability.

FW30A5R10JA

The FW30A5R10JA is a through hole resistor that is used for general purpose applications. It is designed as a combination of two main components – a cylindrical resistor body and wire leads. The resistor body is made from a homogenous mixture of metal oxides, usually zinc and manganese, which is then sintered to form a ceramic. The wire leads are then wrapped around the ceramic body and are connected between the two pins that protrude from either side of the resistor.The resistortion of the FW30A5R10JA resistor is determined by the diameter of the metal oxides and is typically rated at 10 ohms. This means the resistor will resist the flow of electricity when a 10-volt current is applied. The resistance is determined by the sensor’s wattage rating, which is 5 Watts in this case.

Application Field

The FW30A5R10JA resistor can be used in a wide variety of applications, including voltage regulation, power supply protection and current limiting. It can also be used to build circuit protection and resistor networks for various electronic devices.The resistor can be used for both AC and DC circuits, with the voltage rating being up to 600 volts and the power rating being up to 5 watts. The resistor is also designed to withstand high temperature and has an operating temperature range from -55 to +125 degrees Celsius.

Working Principle

The working principle of the FW30A5R10JA is based on the concept of ohm’s law. The current in a circuit is proportional to the voltage applied and inversely proportional to the resistance. This means that if the voltage increases, the current flowing through the resistor increases, and if the resistance increases, the current flowing through the resistor will decrease.When a voltage is applied to the resistor, it converts the electrical energy into thermal energy because of the resistance. The thermal energy is dissipated and the temperature of the resistor rises from the heat generated. The resistor\'s resistance also increases with the temperature due to the change in its material properties.

Conclusion

For general purpose applications, the FW30A5R10JA is a popular choice of resistor due to its low cost, simplicity and durability. The resistor can be used in a wide variety of applications including voltage regulation, power supply protection and current limiting. Its wattage rating is 5 watts and it is designed to withstand up to 600 volts. The resistor works on the principle of ohm’s law, which states that the current in a circuit is proportional to the voltage applied and inversely proportional to the resistance.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description