FX30 ACCESSORY_6001090

Series:	*
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

FX30 ACCESSORY_6001090 RF Accessories

FX30 ACCESSORY_6001090 RF Accessories are a type of radio frequency (RF) accessories used to connect a processor to an antenna. The accessory consists of a base assembly and an output cable to be connected to an antenna. The product offers a wide variety of interfaces, cable lengths, and various mounting options.

Application Field

FX30 ACCESSORY_6001090 RF Accessories offer a variety of applications for radio frequency (RF) communication applications, such as mobile phones, satellite communications, navigation systems, and other communication systems. Additionally, they are used for radio frequency (RF) equipment testing and other RF engineering applications.

Working Principle

Basic working principles behind FX30 ACCESSORY_6001090 RF Accessories involve the RF signal flowing through the accessory and connecting to an antenna. The antenna, in turn, radiates the RF signal towards the receiver or senders. The base assembly consists of a connector to be connected to a processor, a cable for output, a low-noise amplifier (LNA), and a filter. The connectors may vary depending on the application and can include SMA, SMB, and BNC connectors. The signal enters the base assembly, where it passes through an LNA and is filtered to reduce interference from other frequencies. The signal is then amplified and travels through the cable, and exits the base assembly to the antenna. The antenna radiates the RF signal in the proper direction, so that it can be transmitted or received by the other device.

Conclusion

In conclusion, FX30 ACCESSORY_6001090 RF Accessories are a type of radio frequency (RF) accessories used to connect a processor to an antenna for a variety of applications such as mobile phones, satellite communications, navigation systems, and other communication systems. The product consists of a base assembly and an output cable with a variety of interfaces, cable lengths, and various mounting options. The base assembly consists of a connector to be connected to a processor, a cable for output, a low-noise amplifier (LNA), and a filter. The signal enters the base assembly, where it passes through an LNA and is filtered to reduce interference from other frequencies. The signal is then amplified and travels through the cable and exits the base assembly to the antenna. The antenna radiates the RF signal in the proper direction, so that it can be transmitted or received by the other device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description