G13JVCF

Illumination Type, Color:	LED, Red/Green
Electrical Life:	100,000 Cycles
Actuator Material:	Polyamide (PA), Nylon, Glass Filled
Operating Temperature:	-25°C ~ 85°C
Features:	Process Sealed
Ingress Protection:	--
Bushing Thread:	Unthreaded
Panel Cutout Dimensions:	--
Termination Style:	PC Pin
Mounting Type:	Through Hole, Right Angle, Vertical
Illumination Voltage (Nominal):	2.0, 2.1 VDC
Series:	G
Illumination:	Illuminated
Actuator Length:	3.80mm
Actuator Type:	Standard Round
Voltage Rating - DC:	28V
Voltage Rating - AC:	28V
Current Rating:	0.4VA (AC/DC)
Switch Function:	On-Off-On
Circuit:	SPDT
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Toggle Switches

G13JVCF is a type of three-terminal bipolar junction field-effect transistor switch, often referred to as a "Toggle Switch". It is used to control the voltage and current between two electrical devices, often a power source and load. This device operates by modulating the Vdc between the source and the load terminals to turn on and off the device. The G13JVCF type is a two-pole, two-position, three-terminal switch with a low on-resistance of only 0.3-3.0 ohms when operating and less than 1 watt of power dissipation when on.The G13JVCF switch is composed of three terminals and two poles. The terminals are the collector(C), drain(D) and gate(G). The Collector is used as a power connection to the power source. The drain is used to power the load when the switch is on. The gate is controlled by the user and is used to open and close the G13JVCF switch. When the gate is connected to a voltage source, it will open the switch and thus turn on the device. The operating principle of the G13JVCF switch is based on the bipolar junction field-effect transistor. The gate terminal is used to control the amount of DC voltage applied to the drain terminal. When the voltage is applied, it creates a depletion region between the source and the drain and prevents current from passing through the switch. When the gate terminal is connected to a voltage source, it turns on the switch and the current will flow from the source to the drain. The G13JVCF switch is used in various applications such as motor control, compressor control, lighting control, electronic motor starters, relay control. It is most often used as an isolator between the power source and load in order to protect both from overcurrent, short circuits and other potential problems. This switch can also be used to reduce the power consumption of motors and other loads and can be used as a safety switch to turn off the power in the event of an emergency.The G13JVCF switch is a reliable and cost-effective solution for a variety of applications. It is designed to operate consistently at temperatures up to 130°C, making it a viable option in extreme environmental conditions. Additionally, the switch is available in a variety of package sizes, making them suitable for a range of circuit board designs, making it a perfect choice for applications with varying levels of complexity.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description