G2R-1-E-DC12

Switching Voltage:	380VAC, 125VDC - Max
Coil Resistance:	275 Ohms
Coil Power:	530 mW
Contact Material:	Silver Alloy
Operating Temperature:	-40°C ~ 70°C
Termination Style:	PC Pin
Mounting Type:	Through Hole
Features:	Sealed - Flux Protection
Release Time:	5ms
Operate Time:	15ms
Turn Off Voltage (Min):	1.8 VDC
Turn On Voltage (Max):	8.4 VDC
Series:	G2R
Contact Rating (Current):	16A
Contact Form:	SPDT (1 Form C)
Coil Voltage:	12VDC
Coil Current:	43.6mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps

A G2R-1-E-DC12 relay is a high-powered power relay perfect for a range of applications. It can be used as a control and power switch, and is a reliable device for applications in which high current must be switched. This type of relay has a DC coil voltage, which means it requires a direct current in order to activate its core mechanisms. It is designed for a long lifespan and can be relied upon to provide reliable operation in any type of environment. Its applications are typically found in temperature control, motor control, lighting, vending, and electronic devices. The G2R-1-E-DC12 relay is of the double-contact type, where two normally closed contacts are held open when the coil is energized. When the coil is de-energized, the two contacts reconnect, creating a circuit. This type of relay is also commonly referred to as a "make-before-break" relay. The device features a DC coil voltage of 12V, with a nominal current draw of 80mA. The G2R-1-E-DC12 relay utilizes a coil-driven actuator to open and close its contacts. When current is supplied to the coil, the magnetic field generated by the coil acts to attract an armature, which has contact keys attached to it. The force generated by the electromagnet pulls the armature upwards, allowing it to physically open the contacts. When the current is removed, the armature is attracted back down by its own weight, thus closing the contacts. This type of relay is also capable of switching inductive loads, such as motors and transformers, and is rated for a maximum load of ten amperes. It features a nominal creepage distance of 3mm, a sensitivity of 350mW and an insulation voltage of 800V. As such, it is highly resistant to electrical interference and can be used in a wide range of applications. In summary, the G2R-1-E-DC12 is a powerful power relay that is suitable for a wide variety of applications. It can be used to switch both AC and DC devices, and can handle inductive loads as well. It is highly reliable and resistant to electrical interference, making it an ideal choice for a range of applications.

The specific data is subject to PDF, and the above content is for reference