Turn On Voltage (Max):	2.8 VDC
Coil Resistance:	30 Ohms
Coil Power:	530 mW
Contact Material:	Silver Alloy
Operating Temperature:	-40°C ~ 70°C
Termination Style:	PC Pin
Mounting Type:	Through Hole
Features:	Sealed - Flux Protection
Release Time:	5ms
Operate Time:	15ms
Turn Off Voltage (Min):	0.6 VDC
Series:	G2R
Switching Voltage:	380VAC, 125VDC - Max
Contact Rating (Current):	16A
Contact Form:	SPDT (1 Form C)
Coil Voltage:	4VDC
Coil Current:	133mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps

The G2R-1-E-T130DC4 is a solid-state power relay designed to switch loads of up to 130 Amps when triggered by an external control signal. It is an advanced power switching device, capable of controlling single-phase AC power lines with high levels of accuracy and reliability. This relay is suitable for many different industrial applications, including lighting and heating control, HVAC systems, and motor control.

G2R-1-E-T130DC4 Overview

The G2R-1-E-T130DC4 is a three-terminal, single-phase relay with a rated voltage of up to 480 Vac and a rated current of up to 130 Amps. It is a low-current, fast-acting device designed to switch on and off multiple loads quickly and accurately. It is designed to be reliable and consistent in operation and can be used in a wide range of industrial applications.The device features a control terminal, an volt-ampere terminal, and a power terminal. The control terminal is used to activate the relay, while the volt-ampere terminal is used to set the switch on and off points. The power terminal is used to connect the load, which is then switched by the relay.

G2R-1-E-T130DC4 Working Principle

The G2R-1-E-T130DC4 uses a solid-state switch to turn loads on and off. This switch works by controlling the amount of current flowing through the relay. When the control terminal is activated by an external control signal, the relay initiates a switching action, causing current to flow through the power terminal. This flow of current is then controlled by the switch, allowing the load to be turned on or off.The device is designed to operate at a wide range of input voltages and currents, making it suitable for a variety of applications. The device is also designed to be low-noise, meaning it will not interfere with other electronic equipment.

G2R-1-E-T130DC4 Applications

The G2R-1-E-T130DC4 is suitable for a range of industrial applications, including motor control, HVAC systems, lighting and heating control, and industrial process control. It can be used in applications where precise switching of loads is required, such as those found in assembly lines, packaging machines, and robotics systems.The device is also suitable for applications where energy efficiency is a priority, such as refrigeration systems. Its fast-acting switching action makes it ideal for applications where a rapid response time is required, such as floodlights or security systems.

Conclusion

The G2R-1-E-T130DC4 is a high-quality power relay designed for applications that require precise switching of loads. It can switch loads of up to 130 Amps when triggered by an external control signal, and is suitable for applications such as motor control, lighting and heating control, and process control. The device is designed to be reliable and low-noise, making it perfect for energy-saving and rapid-response applications.

The specific data is subject to PDF, and the above content is for reference