G2SBA60-E3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are one of the simplest electronic components and are found in almost every electronic circuit. They are used to manage power flow in circuits, allowing current to flow in one direction while blocking it in the other. Bridge rectifiers are four-diode circuits that provide efficient full-wave rectification. The G2SBA60-E3/45 is a 10 Amp single-phase bridge rectifier that is often used in power supply applications such as battery chargers and DC-DC converters. Here, we\'ll discuss the applications and working principle of the G2SBA60-E3/45 bridge rectifier.

Applications

The G2SBA60-E3/45 bridge rectifier can be used as an efficient full-wave rectifier for both AC and DC power supplies. It can be used in a wide range of applications such as battery chargers, solar panels, DC-DC converters, and LED lighting systems. This bridge rectifier can also be used in power supply circuits that require low losses and a high efficiency rating. It has a rated forward current of 10 A, a reverse voltage of 100 to 600 V, and a maximum junction temperature of 150 °C, making it a suitable choice for many power supply applications.

Working Principle

A bridge rectifier works by using four diodes connected in a closed loop, which allows current to flow in one direction only. As shown in the diagram below, the bridge rectifier uses two anodes and two cathodes to enable full-wave rectification. During an input cycle, the two alternating half-cycles of the AC voltage reach the bridge rectifier\'s diodes in turn. The two anode diodes turn on and conduct current, while the two cathode diodes become reverse-biased and remain off. The output of a full-wave rectifier has all of the same features of a half-wave rectifier, but it is much more efficient.

The G2SBA60-E3/45 bridge rectifier has very low-power losses and a high efficiency rating. This makes it suitable for applications requiring high power output, such as power supplies, battery chargers, and LED lighting systems. It also has a wide operating temperature range and can handle temperatures up to 150 °C.

Conclusion

The G2SBA60-E3/45 bridge rectifier is a 10 Amp single-phase bridge rectifier that is often used in power supply applications such as battery chargers and DC-DC converters. It is a reliable, low-cost, and efficient choice for many applications. Its four-diode configuration allows for full-wave rectification, which is more efficient than half-wave rectification. This bridge rectifier has very low-power losses and a high efficiency rating, making it an ideal choice for many power supply applications.

The specific data is subject to PDF, and the above content is for reference