Allicdata Part #: | G3M-203P-UTU-1DC12-ND |
Manufacturer Part#: |
G3M-203P-UTU-1 DC12 |
Price: | $ 19.21 |
Product Category: | Relays |
Manufacturer: | Omron Automation and Safety |
Short Description: | RELAY SSR 3A 12VDC PCB |
More Detail: | Solid State Relay SPST-NO (1 Form A) 4-SIP |
DataSheet: | G3M-203P-UTU-1 DC12 Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 17.46360 |
Series: | G3M |
Packaging: | Bulk |
Part Status: | Active |
Mounting Type: | Through Hole |
Circuit: | SPST-NO (1 Form A) |
Output Type: | AC, Zero Cross |
Voltage - Input: | 9.6 ~ 14.4VDC |
Voltage - Load: | 75V ~ 264V |
Load Current: | 3A |
Termination Style: | PC Pin |
Package / Case: | 4-SIP |
Supplier Device Package: | 4-SIP |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction to G3M-203P-UTU-1 DC12 Solid State Relays
Solid State Relays (SSRs) are electrically operated component switches that are activated by an electrical signal. They’re composed of semiconductors and integrated circuitry and rely on optoelectronic content. These mechanical, optically isolated components are used to replace electromechanical relays in a wide variety of applications including in relays for industries, buildings, and emergency situations. One specific type of solid state relay is the G3M-203P-UTU-1 DC12, which is designed for use in environments such as those subject to dramatic or frequent changes in temperature or the presence of dust or other foreign matter.
Application Field For G3M-203P-UTU-1 DC12 Solid State Relays
The G3M-203P-UTU-1 DC12 SSR is suitable for use in applications such as variable speed drive motor control, industrial lighting relay, heating and cooling control, and single phase applications where a zero-voltage or resonant turn-on output is required. Because it is a non-contact device with excellent insulation characteristics, overload protection, and a low power consumption, this type of SSR is well suited for these temperature and environmental conditions. Additionally, it is also an ideal choice for use as a safety device in areas that are at risk of short-circuits due to their no-volt release contact.
Working Principle of G3M-203P-UTU-1 DC12 Solid State Relays
The G3M-203P-UTU-1 DC12 SSR consists of two power switches, an opto-isolator, and a switch controlled by a voltage signal for input. Its working principle is based on the transfer of power from the input to the output of the unit when the state of the input signal changes (i.e. from LOW to HIGH or vice versa). When a voltage signal is applied at the input, the opto-isolator output is activated and the two power switches are opened. The power then travels between the input and the output, allowing the output circuit to be activated. When the state of the input signal changes again, the output switches are deactivated and the circuit is broken.
Advantages and Disadvantages of G3M-203P-UTU-1 DC12 Solid State Relays
The G3M-203P-UTU-1 DC12 SSR offers several advantages over other relays, such as its silent operation, low power consumption, and low output current requirement. It also has a high surge capability, allowing it to withstand short-term overcurrents. Additionally, because they are non-contact devices, these relays do not generate a spark, which can be a hazard in explosive environments. On the downside, the G3M-203P-UTU-1 DC12 SSR has a limited frequency range and cannot operate beyond a certain temperature. Additionally, these relays have a slow response time when switching between states, which can lead to slow system reaction times. Finally, they are relatively expensive, making them less cost-effective than other types of relays.
Conclusion
The G3M-203P-UTU-1 DC12 Solid State Relay is a reliable and versatile form of switching technology that can be used in a variety of applications. Although these relays come with a few drawbacks, such as their slow response time and expense, they offer many benefits, such as their low power consumption and high surge capability. As such, they are suitable for use in a wide range of environments and applications.
The specific data is subject to PDF, and the above content is for reference
SSR ZERO SW 480V 16ASolid State
RELAY SSR SPST-NO 20V 4USOPSolid State R...
RELAY DUAL 25A 240V ZC 4-15VDCSolid Stat...
CTRLR TEMP SSR 480V 90A AC OUTSolid Stat...
CTRLR TEMP SSR 240V 90A AC OUTSolid Stat...
RELAY SSR 18A 240VAC AC OUT QCSolid Stat...