G3RV-SL700-A-C1D2 AC/DC24

Series:	G3RV-C1D2
Packaging:	Bulk
Part Status:	Last Time Buy
Mounting Type:	DIN Rail
Circuit:	SPST-NO (1 Form A)
Output Type:	AC, Zero Cross
Voltage - Input:	24VAC/DC
Voltage - Load:	100V ~ 240V
Load Current:	2A
Termination Style:	Screw Terminal
Package / Case:	Module
Supplier Device Package:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Solid State Relays: G3RV-SL700-A-C1D2 AC/DC24 Application Field and Working Principle

Solid State Relays (SSRs) are switching devices that do not rely on mechanical parts such as springs, contacts, or levers to achieve switching, but instead rely on the conductivity of semi-conductors to switch power. The G3RV-SL700-A-C1D2 AC/DC24 SSR is a popular SSR that is used in industrial and home automation applications. This article will discuss the application field of the G3RV-SL700-A-C1D2 and its working principle.The G3RV-SL700-A-C1D2 SSR is a dependable power-switching device that can replace electromechanical relays and contactors in many automation applications. It is designed to switch power up to 10A from a variety of DC and AC power sources. The G3RV-SL700-A-C1D2 is a solid state relay with a high sensitivity, reliable performance, and long life. It is ideal for use as a control device for motor starting, lighting systems, and instrumentation circuits in industrial applications. The G3RV-SL700-A-C1D2 AC/DC24 is designed for use as a power switch in an AC or DC circuit operating at a voltage between 24V and 240V. The relay can switch loads up to 10A with a maximum power dissipation of 250W. It is a single phase RMS control device that operates using AC zero-crossing signals. The G3RV-SL700-A-C1D2 has an isolation voltage of up to 1000V and uses a low on-state resistance of 0.1 ohms. The G3RV-SL700-A-C1D2 is a solid state relay that uses optically-isolated TRIACs to control AC power relays. The relay consists of four individual TRIACs connected in parallel that are triggered by the input signal. The signal is optically isolated before being applied to the TRIACs. The TRIACs are triggered at pre-set zero-crossing points and operates on a polarity sensitive basis. When the input signal is applied, the transient current flows through the TRIAC and the load is switched on or off accordingly.The G3RV-SL700-A-C1D2 is designed for use with an external resistor placed between its signal terminal and the AC power line. The resistor, typically 27K ohms, is used to limit the inrush current and prevent damage to the relay. The resistor also acts as a noise filter to minimize false triggering caused by transients.In conclusion, the G3RV-SL700-A-C1D2 AC/DC24 is a solid state relay that uses optically-isolated TRIACs to control AC power. It is designed for use in industrial and home automation applications with a voltage between 24V and 240V. The G3RV-SL700-A-C1D2 has a maximum power dissipation of 250 watts and a maximum switch current of 10A. It should be used in conjunction with an external resistor to limit the inrush current and assist with noise reduction.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description