G3TC-ODC15A DC15

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

I/O Relay Modules provide control of electrical circuits using an isolated voltage source. The G3TC-ODC15A DC15 is one such module, able to control a variety of high-current and low-current applications. This article will discuss the application field and working principle of the G3TC-ODC15A DC15.

The G3TC-ODC15A DC15 is a two-channel I/O Relay Module. It is designed for use with industrial equipment or with automation and control systems. The device can be used in a variety of applications, including motor control, power conversion, safety scenarios, switchgear control, and fire control.

The module is equipped with two channels composed of 4 normally-open contacts, 1 normally-closed contact, and 1 common contact. This allows for the control and conversion of AC and DC currents in multiple directions. The device can also be used to control low-current loads, such as lights, function buttons, or buzzers.

The DC15 module has a maximum switching power of 750W and a maximum switching voltage of 75V. The device can be powered by a 12 to 24V DC power source and is equipped with diodes, transistors, and zero-cross SOIC16 ICs to provide insulation, protect from static electricity, and ensure a long operational lifetime.

The G3TC-ODC15A DC15 module is designed with both safety and convenience in mind. In addition to its diode, transistor, and zero-cross SOIC16 IC protections, the device has an operating current of 800mA and an impedance of < 1ohm. This ensures that even under overload conditions, the DC15 module remains stable and does not cause any harm to the connected devices or system.

The device operates on the principle of switching circuits to either an on or off state. For this purpose, the DC15 uses a contactor and an electromagnet. When the input terminal is connected to ground potential, an electromagnetic field is generated, which causes the contactor to close. This closes the contacts, allowing current to flow. When the input terminal is disconnected, the contactor re-opens, which stops the current from flowing.

The DC15 module can be used in a wide range of applications. It can be used to operate lights, function buttons, motors, contactors, and relays. It can also be used in the automation industry to control various devices. In addition, the device is suitable for use in safety and fire protection applications.

In conclusion, the G3TC-ODC15A DC15 is an I/O Relay Module that provides control of electrical circuits. It is designed for use with industrial equipment or with automation and control systems. The device is equipped with two channels composed of four normally-open contacts, one normally-closed contact, and one common contact. The DC15 module has a maximum switching power of 750W and a maximum switching voltage of 75V. It operates on the principle of switching circuits to either an on or off state. The device can be used in a wide range of applications, including motor control, function buttons, and fire protection.

The specific data is subject to PDF, and the above content is for reference