G5B-1-H-DC24

Turn On Voltage (Max):	18 VDC
Coil Resistance:	2.88 kOhms
Coil Power:	200 mW
Contact Material:	Silver (Ag)
Operating Temperature:	-40°C ~ 70°C
Termination Style:	PC Pin
Mounting Type:	Through Hole
Features:	Sealed - Flux Protection
Release Time:	10ms
Operate Time:	10ms
Turn Off Voltage (Min):	1.2 VDC
Series:	G5B
Switching Voltage:	250VAC, 30VDC - Max
Contact Rating (Current):	3A
Contact Form:	SPST-NO (1 Form A)
Coil Voltage:	24VDC
Coil Current:	8.3mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Obsolete
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power Relays, Over 2 Amps

A power relay is an electrically operated switch that is used for switching an electrical circuit on or off. Relays are used to control high-voltage circuits with low-power signals. They are usually operated by using an electromagnet to pull a switch arm into position. The G5B-1-H-DC24 is one type of high-current power relay, designed for switching current up to 2 amperes.The G5B-1-H-DC24 power relay has a number of applications, including:

• Switching on and off motors for home appliances
• Controlling home automation systems
• Switching solenoid valves
• Controlling relays in industrial automation systems
• Switching lights on and off in commercial lighting systems

The G5B-1-H-DC24 power relay is composed of three main parts: the coil, the armature, and the contacts. The coil is a copper wire that is wound around the armature, which is a magnetically-operated switch arm. The armature is held in place by magnets and springs. The contacts are the part of the relay that actually makes or breaks the circuit. The contacts can be normally open (NO) or normally closed (NC). The working principle of the G5B-1-H-DC24 power relay is simple. When an electric current passes through the coil, it produces a magnetic field that attracts the armature, which then pulls the contacts to the closed position. This is known as energizing the relay. When the current is stopped, the armature is released and the contacts open. This is called de-energizing the relay. The G5B-1-H-DC24 power relay can be wired up in either a normally open (NO) or normally closed (NC) configuration, depending on the application.In addition to the traditional mechanical operation of the G5B-1-H-DC24 power relay, there are also a variety of semiconductor versions with enhanced features such as high speed switching, low power consumption, and high isolation voltage. These semiconductor relays are often used in modern electronics and automation applications where the traditional mechanical version may not be suitable.The G5B-1-H-DC24 power relay is a reliable and cost-effective switch for controlling electric circuits. It is easy to use and can be configured to fit any application. With its combination of high switching current and low power consumption, it is the ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference