G5SBA80-M3/51

Series:	--
Packaging:	Tray
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	800V
Current - Average Rectified (Io):	2.8A
Voltage - Forward (Vf) (Max) @ If:	1.05V @ 3A
Current - Reverse Leakage @ Vr:	5µA @ 800V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, GBU
Supplier Device Package:	GBU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to G5SBA80-M3/51 Bridge RectifierThe G5SBA80-M3/51 bridge rectifier is a high power rating module from TE Connectivity in its SB series of bridge rectifiers. It is a general purpose bridge rectifier used for applications that require high surge power such as motor drives, lighting, UPS and backup power supplies. The device has a peak on-state current of 80A, a high thermal cycling resistance of 1000VAC, a maximum blocking voltage of 600VAC, a high frequency sustained voltage up to 300kHz and a maximum capacitive load of 2000µF. This bridge rectifier is designed with a heat dissipating metal casing, making it ideal for use in harsh and compact environments. Application Fields of G5SBA80-M3/51 Bridge RectifierThe G5SBA80-M3/51 bridge rectifier is widely used in a variety of applications such as motor drives, lighting, UPS and backup power supplies. It is also used for line-to-line and line-to-ground power conversion for computers and other electronic equipment. The device is ideal for applications where high surge power is required such as wind turbines and solar systems. This bridge rectifier is used in many automotive applications such as car audio systems, recreational vehicles, and marine electronics. It is also used in many other commercial and industrial applications such as electric power, ultraviolet radiation curing, fuel injection systems and robotics. Working Principle of G5SBA80-M3/51 Bridge RectifierThe working principle of G5SBA80-M3/51 bridge rectifier is based on the diode bridge configuration. The device consists of four diodes arranged in a closed loop, forming the bridge rectifier. The input current is fed in a single phase alternating current (AC) and then is converted to a direct current (DC) output through the diode bridge. The bridge rectifier works by allowing only the carrier wave which is heading in the proper direction to flow, while blocking the reverse wave from conducting. As the alternate half cycles of the AC current continuously rearange the polarity of the input voltage, the diode bridge will convert the alternating current to a unidirectional direct current. The converted direct current has both positive and negative polarities, and no waveform distortion.ConclusionThe G5SBA80-M3/51 bridge rectifier is a high power rating module from TE Connectivity in its SB series of bridge rectifiers. This device is designed with a heat dissipating metal casing, making it ideal for use in harsh and compact environments. The device is used in a wide range of applications such as motor drives, lighting, UPS and backup power supplies. The device works by allowing only the carrier wave which is heading in the right direction to flow, while blocking the reverse wave from conducting. The bridge rectifier is used to convert alternating current to a unidirectional direct current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description