G6AK-234P-ST40-US-DC48

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The G6AK-234P-ST40-US-DC48 signal relay is a two-armature selective relay. It is designed for use in tall-order multiplexing systems and is ideally suited for applications where the load is closely monitored. Depending on advice from the user and the layout of the system, a swing armature or hinge armature may be used.

The two-armature signal relay has a rated operating current of 2 amps with a contact rating of 12V or 24V AC and DC. It is designed for use in industrial, commercial, and residential circuits. Two set screws are provided to make connection to the side arms. The screw terminals permit quick mating with insulated terminals of the relay.

The G6AK-234P-ST40-US-DC48 signal relay has a wide range of applications, from motor control to power management. It is suitable for use in applications where the load must be monitored with accuracy and reliability due to its two-armature design. The two armatures provide a critical distinction between the two halves of the switch, allowing for better control.

The G6AK-234P-ST40-US-DC48 signal relay works on the principle of electromagnetism, in which an electrical current is used to create a magnetic field, which in turn operates a switch. It utilizes an electromagnetic relay coil, which is energized when a current is applied to one of the remote contacts. When the coil is energized, it causes current to flow between the two sets of contacts, completing the circuit and allowing power to flow.

This signal relay also relies on a certain mechanical action. When the current is applied to the coil, the armature is moved along a fixed path and makes contact with the stationary contacts. This contact allows an electrical connection to be made between the two sets of contacts, completing the circuit and allowing power to flow.

In addition to the two armatures that are used to make contact with the electrical contacts, the G6AK-234P-ST40-US-DC48 signal relay also utilizes two additional components: a spring and plastic washer. The spring provides a preload, which ensures that the coil is always energized when the switch is closed. The plastic washer acts as an insulator, preventing any short-circuits that may occur between the armatures and the contacts.

The G6AK-234P-ST40-US-DC48 signal relay is able to provide accurate control of loads up to 2 amps with a contact rating of 12V or 24V AC and DC. It is designed for use in industrial, commercial, and residential circuits. The two armatures provide a critical distinction between the two halves of the switch, allowing for better control.

The specific data is subject to PDF, and the above content is for reference