Allicdata Part #: | G6D-1A-DC12-ND |
Manufacturer Part#: |
G6D-1A-DC12 |
Price: | $ 0.00 |
Product Category: | Relays |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | RELAY GEN PURPOSE SPST 5A 12V |
More Detail: | General Purpose Relay SPST-NO (1 Form A) 12VDC Coi... |
DataSheet: | G6D-1A-DC12 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | G6D |
Packaging: | Bulk |
Part Status: | Obsolete |
Relay Type: | General Purpose |
Coil Type: | Non Latching |
Coil Current: | 16.7mA |
Coil Voltage: | 12VDC |
Contact Form: | SPST-NO (1 Form A) |
Contact Rating (Current): | 5A |
Switching Voltage: | 250VAC, 30VDC - Max |
Turn On Voltage (Max): | 8.4 VDC |
Turn Off Voltage (Min): | 1.2 VDC |
Operate Time: | 10ms |
Release Time: | 10ms |
Features: | Sealed - Fully |
Mounting Type: | Through Hole |
Termination Style: | PC Pin |
Operating Temperature: | -25°C ~ 70°C |
Contact Material: | Silver Alloy |
Coil Power: | 200 mW |
Coil Resistance: | 720 Ohms |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The G6D-1A-DC12 is a power relay that is widely used in control systems today. The G6D-1A-DC12 relay has a maximum current rating of up to 2 amps, and it is designed to switch AC or DC loads. It is ideal for applications that require a reliable, low power switching solution.
The construction of this relay consists of a dielectric material that is surrounded by two conducting rings separated by two insulation rings. Both rings are wound with a copper wire, and a magnet coil is attached around the outside surface of the housing. The magnet coil provides the current to operate the contacts and cause them to open or close.
The basic working principle of the G6D-1A-DC12 is based on the interaction between the magnet coil and the dielectric material. When the coil is energized, a magnetic field is created which causes the dielectric material to move towards the coil. This movement causes the contacts inside the relay to move, and either open or close the circuit. Once the coil is de-energized, the contact will return to its original position.
The G6D-1A-DC12 is typically used for switching low power loads, such as motors, motor starters, lamps, fans, and other circuits. It is also used in automotive and marine applications, and for industrial and commercial applications. In addition, the G6D-1A-DC12 is often used for applications that require an increased level of safety, such as is required in medical equipment and life support systems.
The G6D-1A-DC12 is a reliable and economical solution for low power switching applications. It is easy to install and maintain and offers a wide range of switching options. The G6D-1A-DC12 is capable of switching both AC and DC loads up to 2 amps, and it is particularly suitable for applications where low power switching is required.
The specific data is subject to PDF, and the above content is for reference
General Purpose Relay Power PCB Relay SP...
RELAY GENERAL PURPOSERelay Coil
RELAY GEN PURP 4PDT 48VACRelay Coil
RELAY GEN PURP 4PDTRelay Coil
RELAYRelay Coil
CONN TERM BLOCKRelay Coil