Allicdata Part #: | G6EU-134P-ST-US-DC9-ND |
Manufacturer Part#: |
G6EU-134P-ST-US-DC9 |
Price: | $ 5.81 |
Product Category: | Relays |
Manufacturer: | Omron Electronics Inc-EMC Div |
Short Description: | RELAY GENERAL PURPOSE SPDT 2A 9V |
More Detail: | General Purpose Relay SPDT (1 Form C) Through Hole |
DataSheet: | G6EU-134P-ST-US-DC9 Datasheet/PDF |
Quantity: | 1000 |
25 +: | $ 5.28091 |
Turn On Voltage (Max): | 6.3 VDC |
Coil Resistance: | 405 Ohms |
Coil Power: | 200 mW |
Contact Material: | Silver (Ag), Gold (Au) |
Operating Temperature: | -40°C ~ 70°C |
Termination Style: | PC Pin |
Mounting Type: | Through Hole |
Features: | Sealed - Fully |
Release Time: | 5ms |
Operate Time: | 5ms |
Turn Off Voltage (Min): | -- |
Series: | G6E |
Switching Voltage: | 250VAC, 220VDC - Max |
Contact Rating (Current): | 2A |
Contact Form: | SPDT (1 Form C) |
Coil Voltage: | 9VDC |
Coil Current: | 22.2mA |
Coil Type: | Latching, Single Coil |
Relay Type: | General Purpose |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Signal relays are used to control electrical circuits and provide isolation between low current analog and/or digital logic control signals and higher current loads or more powerful control circuits. A typical relay consists of one or more electromagnetic coils, operating at or close to the open circuit voltage of the power supply, and one or more sets of contact that are physically connected (switched) to the energized coil(s). The contacts of the signal relay are normally in the open state while the coil is de-energized. When the coil is in the energized or closed state, the contacts close or make, allowing signals to pass from one portion of the circuit to another.
The G6EU-134P-ST-US-DC9 is an Up to 2 Amps signal relay with a wide variety of applications. This device is suitable for applications where two independent relay outputs are required, with both normally open and normally closed contact configurations. The device can also provide low current and voltage sensing, making it ideal for use in motor drives, AC start/stop control, and other control systems.
The G6EU-134P-ST-US-DC9 has a latching type contact system which requires the coil to be energized once in order to trigger the contacts. This makes the device suitable for applications where long periods of usage or frequent environmental changes require a reliable contact system. Due to its high contact ratings this device is also ideal for applications where high current loads or higher power needs must be controlled. The G6EU-134P-ST-US-DC9 is designed to measure and switch AC and DC signals, with interference suppression circuits integrated into the contact system. This allows a high degree of flexibility, including allowing for a wide range of current ratings (up to 2 Amps).
The G6EU-134P-ST-US-DC9 signal relay has a number of advantages. The device is compact and lightweight, making it suitable for applications with space constraints. The device also has integrated protection circuits which prevent electromagnetic interference (EMI) levels from interfering with the circuits. In addition, the latching contact system requires only an initial coil energization and is therefore more reliable than other types of contact systems, making it ideal for applications that require frequent environmental changes.
In conclusion, the G6EU-134P-ST-US-DC9 is an Up to 2 Amps signal relay that has a wide variety of applications ranging from motor control to contact sensing and power switching. The device is reliable, efficient, and features internal protection circuits to reduce the risk of EMI. Its latching contact system requires only an initial coil energization, making it suitable for applications with frequent environmental changes. This combined with its ability to measure and switch both AC and DC signals makes the G6EU-134P-ST-US-DC9 an ideal device for control applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
G6EU-134P-ST-US-DC12 | Omron Electr... | 3.14 $ | 1000 | RELAY GEN PURPOSE SPDT 2A... |
G6EU-134P-ST-US-DC3 | Omron Electr... | 3.14 $ | 1000 | RELAY GENERAL PURPOSE SPD... |
G6EU-134PL-ST-US-DC24 | Omron Electr... | 3.58 $ | 1000 | RELAY GEN PURPOSE SPDT 2A... |
G6EU-134P-ST-US-DC24 | Omron Electr... | 3.77 $ | 1000 | RELAY GEN PURPOSE SPDT 2A... |
G6EU-134PL-ST-US-DC5 | Omron Electr... | 5.28 $ | 1000 | RELAY GENERAL PURPOSE SPD... |
G6EU-134P-ST-US-DC9 | Omron Electr... | 5.81 $ | 1000 | RELAY GENERAL PURPOSE SPD... |
G6EU-134PL-ST-US-DC12 | Omron Electr... | 5.81 $ | 1000 | RELAY GEN PURPOSE SPDT 2A... |
G6EU-134P-ST-US-DC5 | Omron Electr... | 6.29 $ | 1000 | RELAY GENERAL PURPOSE SPD... |
G6EU-134P-ST-US-DC6 | Omron Electr... | 6.29 $ | 1000 | RELAY GENERAL PURPOSE SPD... |
G6EU134PUSDC6 | Omron Electr... | 7.55 $ | 50 | RELAY GEN PURPOSERelay |
RELAY GENERAL PURPOSERelay
RELAY TELECOM DPDT 1A 24VTelecom Relay D...
RELAY GENERAL PURPOSE DPDT 1A 3VGeneral ...
RELAY GEN PURPOSE DPDT 1A 4.5VGeneral Pu...
RELAY TELECOM DPDT 2A 3VTelecom Relay DP...
RELAY GENERAL PURPOSE 4PDT 2A 3VGeneral ...