G6ZU-1PE DC3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

High Frequency (RF) relays are devices that allow a signal to be transferred from one point to another without the need to be physically connected, providing advantages in terms of space, cost and flexibility. The G6ZU-1PE DC3 is a high frequency (RF) relay designed for use with Automatic Meter Reading (AMR) systems. It is a low-cost, compact solution for connecting two points, allowing for remote communication and automatic meter reading.

The most important features of the G6ZU-1PE DC3 are its low distortion, low insertion loss, low voltage standing wave ratio, and high isolation. The DPDT contact system consists of two 4.2mm terminals on each side, allowing for a wide range of connections. It also features a self-cleaning, moisture-resistant, and corrosion-resistant design to ensure long-term reliability.

The G6ZU-1PE DC3 is designed for operation on two primary frequencies: DC (0.001 GHz) and 9.6 GHz. It provides an operational voltage range of 8.5 V to 28 V and a current load of 10 mA. The total current rating is 55 mA, with a minimum lamp wattage of 1.2 W and a maximum of 6 W. The power handling capability of the resistor is 150 mW, while the maximum output power is 7.6 W.

The working principle of the G6ZU-1PE DC3 relay is centered around its main switching element - a diode. A diode is a semiconductor device that acts as an electronic switch, allowing a current to flow in only one direction while blocking the opposite direction. The switch is controlled by two relays, a high side and a low side, which connect two points in the circuit. When one of the relays is activated, the diode is closed, and the signal is transferred from one point to the other. When the other relay is activated, the diode opens, and the signal is cut off.

The G6ZU-1PE DC3 is a versatile high frequency (RF) relay suitable for a variety of applications. It is ideal for applications requiring a low power switch in both the DC and 9.6 GHz range, such as Automatic Meter Reading (AMR) systems. It can also be used in data logging, RF signal routing, and antenna tuning applications. The G6ZU-1PE DC3\'s low voltage standing wave ratio, low distortion, low insertion loss, and high isolation make it an excellent choice for applications where signal integrity is a priority.

The specific data is subject to PDF, and the above content is for reference