| Allicdata Part #: | G8P-1A2T-FDC22-ND |
| Manufacturer Part#: |
G8P-1A2T-F DC22 |
| Price: | $ 0.00 |
| Product Category: | Relays |
| Manufacturer: | Omron Electronics Inc-EMC Div |
| Short Description: | RELAY GEN PURPOSE SPST 30A 22V |
| More Detail: | General Purpose Relay SPST-NO (1 Form A) 22VDC Coi... |
| DataSheet: |  G8P-1A2T-F DC22 Datasheet/PDF |
| Quantity: | 1000 |
| 1 +: | 0.00000 |
| Turn On Voltage (Max): | 16.5 VDC |
| Coil Resistance: | 536 Ohms |
| Coil Power: | 900 mW |
| Contact Material: | Silver Cadmium Oxide (AgCdO) |
| Operating Temperature: | -55°C ~ 105°C |
| Termination Style: | Quick Connect - 0.187"/0.250" |
| Mounting Type: | Chassis Mount |
| Features: | Insulation - Class F |
| Release Time: | 10ms |
| Operate Time: | 15ms |
| Turn Off Voltage (Min): | 2.2 VDC |
| Series: | G8P |
| Switching Voltage: | 250VAC, 28VDC - Max |
| Contact Rating (Current): | 30A |
| Contact Form: | SPST-NO (1 Form A) |
| Coil Voltage: | 22VDC |
| Coil Current: | 41.0mA |
| Coil Type: | Non Latching |
| Relay Type: | General Purpose |
| Part Status: | Obsolete |
| Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The G8P-1A2T-F DC22 is a powerful relay designed for use in applications which require more than 2 amps of current to drive its electromagnetic coils. It has two separate coils, each of which can drive up to 2 amperes of current. The G8P-1A2T-F DC22 is designed to handle higher power requirements, especially in industrial and commercial areas.
The G8P-1A2T-F DC22 has a split-phase operation, allowing the two coils to be energized at the same time. This helps to reduce the risk of burnout in high current applications, as the two coils can take on different loads independently. In this way, the overall circuit will be less likely to overload and shut down due to too much current.
The G8P-1A2T-F DC22 is designed to be used in applications with DC voltages. It is rated for switching up to 230 volts at currents up to 2 amperes. When used in a DC circuit, the voltage across the two coils must be the same. This ensures that the two coils each perform their task properly, without causing imbalances in the circuit.
The G8P-1A2T-F DC22 works by using a series of switches to either open or close the connection between the two coils. When the relay is de-energized, the switches open and the two coils are disconnected. When the relay is energized, the switches close and the two coils are connected. This allows for switching between two different operating modes, depending on the setting of the switches.
The G8P-1A2T-F DC22 is commonly used in industrial, commercial, and residential applications. It is often used in electrical and electronic circuits, such as those found in motor controllers, pumps, and other appliances which require higher current connections. This relay is also used in industrial equipment, such as pumps, electric heaters, and other high power devices.
Due to its high current rating, the G8P-1A2T-F DC22 is an excellent choice for applications which require reliable switching and control. Its sturdy design and long lasting operation make it a reliable choice in a variety of circuits, ensuring consistent performance and safe operation.
The specific data is subject to PDF, and the above content is for reference
General Purpose Relay Power PCB Relay SP...
RELAY GENERAL PURPOSERelay Coil
RELAY GEN PURP 4PDT 48VACRelay Coil
RELAY GEN PURP 4PDTRelay Coil
RELAYRelay Coil
CONN TERM BLOCKRelay Coil