GA1T040F103UA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Position Sensors are widely used in a variety of applications ranging from obtaining data on angle motion and other rotational movements to positional measurements and rotational orientations. The GA1T040F103UA is one example of this type of sensor. In this article we will look at its application field and working principle.

The GA1T040F103UA is a high-precision analog output position sensor designed to measure the angular position of a rotating shaft. It is commonly used in medical applications, specifically in robotics, where precise motion control is required. It easily interfaces with a microcontroller and has a wide measuring range of 0 to 360 degrees. It is a robust and reliable unit which can be mounted to the shaft of a device requiring position measurement.

The sensor is capable of accurately measuring angles with a resolution of 0.35°. It also has an integrated temperature compensation circuit which ensures it has a high level of accuracy even in changing temperature conditions. This makes it well-suited for robotic arms and other applications that require precise angle measurement. Additionally, the sensor provides digital outputs, which can be used to create triggered events or used in digital control systems.

The working principle of the GA1T040F103UA is based on the Hall effect. This is a phenomenon where a current flows perpendicularly to the direction of the electric and magnetic fields in a material, creating a voltage difference. The GA1T040F103UA uses a magnetoresistor as its sensing element. A magnetoresistor is a variable resistor which changes its electrical resistance in response to an external magnetic field.

The GA1T040F103UA is equipped with two Hall elements which allow it to measure the angle of the rotating shaft. It also has two permanent magnets, one for each Hall element. These magnets generate the required magnetic fields for the sensor to measure. As the shaft rotates, the distance between the Hall elements changes depending on the position of the shaft. This change in distance causes a change in the sensed magnetic fields, resulting in a change in voltage. This voltage is then converted into an analog output signal which corresponds to the position of the shaft.

In summary, the GA1T040F103UA is a position sensor designed for use in applications such as robotics and other motion control systems. Its robust design, wide measuring range and integrated temperature compensation circuit ensure accuracy and precision. The sensor thereby provides an effective and reliable means of measuring the angle or position of a rotating shaft.

The specific data is subject to PDF, and the above content is for reference