GAGA10KM3499J15

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

NTC thermistors are temperature sensors that are used to measure temperature within a limited temperature range. They are made up of a ceramic semiconductor material that has a negative temperature coefficient of resistance, meaning its resistance decreases as its temperature increases. The GAGA10KM3499J15 is a negative temperature coefficient thermistor that is composed of a metal-oxide layer covered with a protective coating.

GAGA10KM3499J15 thermistors can be used in many applications, such as in temperature control and sensing, over-temperature protection, and flow rate measurement. In temperature control and sensing, the thermistor can be used to measure the temperature of an environment or an object. When the temperature is detected, the thermistor will be able to send a signal to initiate changes in the environment to maintain a certain temperature. In over-temperature protection, the thermistor can be used to detect when the temperature exceeds a certain threshold. This thermistor will then send a signal to initiate a response to lower the temperature back to within acceptable levels. Finally, thermistors can be used to measure the flow rate in a system by measuring the temperature difference across the flow.

The internal structure of the GAGA10KM3499J15 is made up of a ceramic semiconductor material and a conductive-containing layer. The ceramic material insulates and holds the conductive layer, providing for higher accuracy and stability of readings. The conductive-containing layer contains an element with a negative temperature coefficient, which is typically composed of metal oxide. As the temperature increases, the conductor’s resistance decreases due to the decreased temperature coefficient.

The working principle of GAGA10KM3499J15 thermistors is that as the temperature increases, its resistance decreases, and vice-versa. When the thermistor is connected to a power source, a current will flow from the source through the thermistor, across a voltage divider circuit, and to ground. The voltage at the output of the divider is then measured and is proportional to the temperature, allowing for the temperature to be calculated. In order for the readings to be accurately measured and temperature correctly calculated, certain factors must be considered. These factors include the ambient temperature, the resistance and capacitance of the thermistor, and the measured voltage.

In conclusion, the GAGA10KM3499J15 is a negative temperature coefficient thermistor that is used for temperature sensing and control. It is composed of a metal oxide layer covered with a protective coating. The thermistor’s working principle is that as the temperature increases, its resistance decreases. The thermistor is connected to a voltage divider circuit and the voltage output by the divider is a measure of the temperature. The thermistor is used in many applications such as temperature sensing and control, over-temperature protection, and flow rate measurement.

The specific data is subject to PDF, and the above content is for reference