GBJ1001-BP

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	100V
Current - Average Rectified (Io):	10A
Voltage - Forward (Vf) (Max) @ If:	1.05V @ 5A
Current - Reverse Leakage @ Vr:	10µA @ 100V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, GBJ
Supplier Device Package:	GBJ
Base Part Number:	GBJ1001

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to GBJ1001-BP Diodes - Bridge Rectifiers

The GBJ1001-BP is a bridge rectifier diode device. It is a solid state device that is used in power electronics circuits. The device has a forward voltage drop of up to 3V, with a maximum rated current of 3A. Its forward voltage drop is also very low, which means it is suitable for a variety of rectifier circuits, allowing it to be used in a wide range of applications.

Applications of GBJ1001-BP

The most common application of the GBJ1001-BP is as a power rectifier, which means it can be used to control and convert AC input voltages into stable DC output voltages. This device is typically used in power supplies for electronic applications, such as AC to DC adapters, battery charging circuits, and in inverter circuits.In addition to being used in power rectifier circuits, the GBJ1001-BP can be used in high frequency switching circuits. This type of device is well-suited for switching applications due to its low on-state resistance, which reduces power loss in high-frequency switch circuits and increases the efficiency of the circuit.Furthermore, the device can be used in pulse and voltage regulation applications. It is particularly useful for providing a stable regulated output voltage when used in switching circuits.

Working Principle of GBJ1001-BP

The GBJ1001-BP is a four-terminal bridge rectifier. The device has an anode, a cathode, a gate and a drain. An AC input voltage is applied to the anode and cathode, while the gate and drain terminals are used to control the current flow in the device.The operation of the bridge rectifier is based on the forward bias principle. When an AC input signal is applied to the anode and cathode, the diode will become forward biased and current will flow through it. The current flow is determined by the applied input signal, the voltage rating of the diode and the load resistance.As the AC input voltage reaches and surpasses the forward voltage of the diode, current will flow through the device. When the AC input signal changes polarity, the device will become reverse biased and the current flow will be blocked.In order to control the current flow, the gate and drain terminals of the device can be used. The gate terminal can be used to control the diode forward voltage, while the drain terminal can be used to regulate the amount of current that flows through the device.

Conclusion

The GBJ1001-BP is a four-terminal bridge rectifier with a forward voltage drop of up to 3V and a maximum rated current of 3A. It can be used in a variety of power electronics circuits, such as power rectifiers, high frequency switching circuits, and pulse and voltage regulation applications. The operation of the device is based on the forward bias principle, with the gate and drain terminals being used to control the current flow through the device.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description