GBPC1506

Series:	--
Packaging:	Tray
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	600V
Current - Average Rectified (Io):	15A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 7.5A
Current - Reverse Leakage @ Vr:	5µA @ 600V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	QC Terminal
Package / Case:	4-Square, GBPC
Supplier Device Package:	GBPC
Base Part Number:	GBPC1506

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers

A Bridge Rectifier, sometimes called a full-wave rectifier, is an electronic component that rectifies power to a DC signal by using a combination of four diodes. This four diode configuration is known as a bridge rectifier. Bridge rectifiers are commonly used in applications that require the conversion of AC signals to DC signals.The most common type of bridge rectifier is the GBPC1506. It is a four-diode bridge with a built-in center-tap, meaning that it has four pins, three of which are connected to one side and the fourth connected to the other. This results in a symmetrical output and a center-tap for easy connection to the load.The GBPC1506 bridge rectifier is a bi-directional device, meaning that it can be used to both rectify and invert signals. In rectification, the bridge rectifier is used to convert AC power to DC power. This process is accomplished by connecting the GBPC1506 bridge rectifier between the AC power source and the load. When alternating current flows through the bridge rectifier, it creates a direct current through the load in the required direction.When used in inversion mode, the bridge rectifier is connected between the load and the ground. This causes the alternating current to be inverted and a voltage of opposite polarity is created at the load.In addition to its basic rectification and inversion functions, the GBPC1506 bridge rectifier can be used in applications such as heat control and motor speed control. In heat control applications, the bridge rectifier is used to convert alternating current to direct current, which is then used to modulate the amount of heat produced by a heating element. In motor speed control applications, the bridge rectifier is used to convert alternating current to direct current, which is then used to control the speed of a motor.The GBPC1506 bridge rectifier utilizes a unique construction which makes it suitable for use in high-power applications. The device is constructed from a thick a-Si layer between two dielectric layers. This construction helps to prevent potential failure due to electronic breakdown and helps to improve the overall efficiency of the rectified power supply.By combining two rectified current sources in one package, the GBPC1506 bridge rectifier offers the most efficient and cost effective solution for many power applications. As such, the GBPC1506 bridge rectifier is a versatile and reliable device that is suitable for many applications requiring the conversion of AC signals to DC signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description