GBU1005 D2G

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	600V
Current - Average Rectified (Io):	10A
Voltage - Forward (Vf) (Max) @ If:	1.1V @ 10A
Current - Reverse Leakage @ Vr:	5µA @ 600V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, GBU
Supplier Device Package:	GBU

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Bridge Rectifiers

The use of electronics is becoming increasingly prevalent today and a variety of components are used in order to construct these electronic devices. One such crucial element of an electronic circuit are rectifiers and amongst their categories, bridge rectifiers play an important role in many electronic designs. The GBU1005 D2G is one such bridge rectifier, and this article will explain its application field and working principle. A rectifier is an electronic component that converts AC power into DC power and the electrical device can either be a single-phase or a three-phase rectifier. There are three general types of rectifiers that are used today, the half-wave rectifier, the full-wave rectifier, and the bridge rectifier. The bridge rectifier is the most common within commercially available products, and it is used in various applications. Bridge rectifiers are made up of four diodes arranged in a “bridge" configuration. The input of an AC signal is fed into two diodes of the bridge, while the output is taken from the other two diodes. The output voltage is DC or pulsating DC depending on the nature of the input AC signal. As an AC signal passes one set of diodes the voltage output is of the negative polarity, while the polarity is positive with the other set of diodes. In essence, the two sets of diodes bridge the two polarities and output a DC signal. In terms of their applications, bridge rectifiers are used in a variety of products, ranging from power supplies to sound reproduction and electric vehicle batteries. The GBU1005 D2G is a bridge rectifier specifically designed by STMicroelectronics, and it is a high power, single phase, bridge rectifier with an impressive maximum PRV of 1000V. It is designed to produce maximum current of 2A and has a blocking voltage of 1000V, making it ideal for various equipment applications. The working principle of the GBU1005 D2G starts with the input AC signal. This signal is fed into the two diodes of the bridge, and this causes a negative voltage to arise at one end of the bridge and a positive voltage to arise at the other end. The electrical energy of the AC signal is stored in the form of electrical charge as the magnetic field collapses, and the electrons are since then available in the bridge. As the bridge rectifier is a full-wave rectifier, the two sets of diodes bridge both polarities and thus output a DC voltage, which is taken out at the bottom right. To conclude, the GBU1005 D2G is an ideal bridge rectifier for an array of application fields such as power supplies and charging batteries. It is a single phase, high power rectifier that can take in a maximum PRV of 1000V and output a DC voltage. The working principle of the bridge rectifier starts with the input AC signal which passes through the two sets of diodes, bridging the two polarities and thus producing a DC output. With this understanding, bridge rectifiers such as the GBU1005 D2G can be effectively used in electronic designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description