GC2011A-PB

Series:	--
Packaging:	Tray
Lead Free Status / RoHS Status:	--
Part Status:	Obsolete
Moisture Sensitivity Level (MSL):	--
Filter Type:	Digital
Frequency - Cutoff or Center:	--
Number of Filters:	2
Filter Order:	--
Voltage - Supply:	3.1 V ~ 3.5 V
Mounting Type:	Surface Mount
Package / Case:	160-BGA
Supplier Device Package:	160-BGA (15x15)
Base Part Number:	GC2011

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GC2011A-PB Interface

GC2011A-PB is an integrated communication interface for serial and parallel communication. It supports a variety of protocols, such as Ethernet and I2C, to facilitate the exchange of information between devices. Its ability to support different communication protocols allows it to be used in a wide range of applications.GC2011A-PB includes a transceiver, an inactive low power transceiver, and a hybrid communicator, or ‘cross-chip’ communicator, that works in the same way as the inactive low power transceiver. The cross-chip communicator terminates communications on the side of the device that is to be connected. The cross-chip communicator and transceiver communicate through 2 GPIO lines. The I2C protocol is used in the communication between the two components.

GC2011A-PB Filters

GC2011A-PB features a set of hardware filters which are capable of filtering out unwanted noise from the received data stream. The hardware filters are divided in two categories – passive and active filters. The passive filters are used to reduce the low and middle frequency components of the received signal. The passive filters are based on the design of the Chebyshev filter which allows for maximum efficiency with minimum noise.The active filters are used to reduce the high frequency components of the received signal. The active filters are based on a sigma-delta modulator and have additional features such as frequency weighting and notch filtering. The active filters offer a much higher degree of noise filtering compared to the passive filters.

GC2011A-PB Active

GC2011A-PB also includes an active communication layer. This active layer allows for fast data transfer between devices connected to the interface. The active layer consists of two components – a physical layer and a data link layer. The physical layer defines the physical connection between the devices and the interface. The data link layer defines the communication protocol used to transfer information between the two connected devices.The physical layer is responsible for sending and receiving data from the connected devices. It contains a set of analog and digital integrated circuits that contain logic to perform serial and parallel communications. The data link layer defines the format of the data that is transmitted and received. It contains logic to transfer the data in the most efficient way possible.In summary GC2011A-PB is an integrated communication interface for serial and parallel communication. It includes a transceiver, an inactive low power transceiver, a hybrid communicator, and a set of hardware filters. Additionally, it includes an active communication layer that allows for fast data transfer between connected devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description