Allicdata Part #: | GL270F33IDT-ND |
Manufacturer Part#: |
GL270F33IDT |
Price: | $ 0.23 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | CTS-Frequency Controls |
Short Description: | CRYSTAL 27.000000 MHZ SMD |
More Detail: | 27MHz ±30ppm Crystal 18pF 30 Ohms HC-49/US |
DataSheet: | GL270F33IDT Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.21026 |
Series: | ATSSMGL |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Type: | MHz Crystal |
Frequency: | 27MHz |
Frequency Stability: | ±30ppm |
Frequency Tolerance: | ±30ppm |
Load Capacitance: | 18pF |
ESR (Equivalent Series Resistance): | 30 Ohms |
Operating Mode: | Fundamental |
Operating Temperature: | -40°C ~ 85°C |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | HC-49/US |
Size / Dimension: | 0.461" L x 0.197" W (11.70mm x 5.00mm) |
Height - Seated (Max): | 0.169" (4.30mm) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crystals are a basic but essential element in many everyday products, from watches to computers. The GL270F33IDT crystal is a wide-temperature, low-jitter, high-speed quartz clock oscillator module specifically designed to provide a stable timing solution for various clock or oscillator applications. This article will explain the various applications of this crystal as well as its working principles.
Applications
The GL270F33IDT is a high-performance timing solution, making it suitable for a wide range of applications. It can be used for RF communication, networking, system clocking, automotive and measurement instruments. The clock accuracy, frequency stability and frequency range of this crystal make it an attractive choice for high-speed timing solutions with wide temperature range requirements.
In RF communication, the GL270F33IDT module can be used to generate stable clock signals for both Tx and Rx chains. It is capable of supporting data rates of up to 15Mbits/s, making it suitable for applications requiring high performance such as wireless LANs and wireless PANs. In networking and system clocking, the module can be used to generate stable clock signals for various networking applications, including Ethernet, Gigabit Ethernet and 10G Ethernet. Additionally, the module supports various system clock frequencies, making it ideal for various system clocking applications.
The module is also suitable for automotive applications as it can help achieve superior signal timing synchronization and signal transmission reliability. The crystal’s frequency stability and accuracy make it ideal for providing highly accurate timing signals for control systems. Additionally, its wide temperature range ensures reliable performance in extreme temperatures. Finally, the GL270F33IDT is suitable for use in measurement instruments due to its frequency range and accuracy.
Working Principle
The working principle of the GL270F33IDT is based on the concept of an oscillator. A typical clock oscillator consists of an electronic circuit containing some type of resonator, typically a quartz crystal. The electrical properties of the quartz crystal cause it to vibrate at a specific frequency when a specific voltage is applied, creating a signal of constant amplitude and frequency. The GL270F33IDT takes this concept and miniaturizes it into a low-profile, surface-mount package that is capable of providing highly accurate clock signals.
The module incorporates a 16.0 x 8.0mm ceramic package and 4 pins. The device contains a high-precision quartz crystal, an amplifier circuit and a temperature compensation mechanism. The quartz crystal is designed with a high Q factor, which ensures superior frequency stability over a wide temperature range. Additionally, the amplifier circuit is designed to provide low jitter clock signals with high signal purity and ultra-low phase noise. Finally, the temperature compensation mechanism helps to ensure that the signal amplitude is maintained over the full operating temperature range.
In summary, the GL270F33IDT crystal module is a high-performance, wide-temperature, low-jitter, high-speed quartz clock oscillator module specifically designed to provide a stable timing solution for various clock or oscillator applications. Its wide range of applications and superior signal accuracy make it an attractive choice for many timing solutions.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
GL270F23CDT | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F23CET | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F33CDT | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F33CET | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F35CDT | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F35CET | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F35IDT | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F35IET | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F23IDT | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F23IET | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F33IET | CTS-Frequenc... | 0.22 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
GL270F33IDT | CTS-Frequenc... | 0.23 $ | 1000 | CRYSTAL 27.000000 MHZ SMD... |
Crystal 8.59MHz 39pF 3-Pin CSMD T/R - Ta...
CRYSTAL 52.000 MHZ 12PF SMT52MHz 15ppm C...
CRYSTAL 50.000 MHZ 8PF SMT50MHz 15ppm Cr...
CRYSTAL 48.000 MHZ 8PF SMT48MHz 20ppm Cr...
CRYSTAL 44.000 MHZ 6PF SMT44MHz 20ppm Cr...
CRYSTAL 40.610 MHZ SERIES SMT40.61MHz 15...