GPS-310FS RF/IF and RFID |
|
Allicdata Part #: | GPS-310FS-ND |
Manufacturer Part#: |
GPS-310FS |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | |
Short Description: | GPS MODULE SMD 16CH |
More Detail: | - RF Receiver GPS 1575.42MHz -155dBm PCB, Surface... |
DataSheet: | GPS-310FS Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Current - Receiving: | 45mA |
Supplier Device Package: | Module |
Package / Case: | Module |
Operating Temperature: | -40°C ~ 85°C |
Voltage - Supply: | 3 V ~ 3.6 V |
Features: | -- |
Antenna Connector: | PCB, Surface Mount |
Memory Size: | -- |
Data Interface: | Pads for Pins |
Series: | -- |
Applications: | GPS Receiver |
Modulation or Protocol: | GPS |
Data Rate (Max): | -- |
Sensitivity: | -155dBm |
Frequency: | 1575.42MHz |
Part Status: | Obsolete |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
GPS-310FS is a type of RF Receiver, which is widely used in various industries and fields. It is mainly used for receiving and processing continuous signals, such as those from satellite navigation systems. This type of receiver offers high performance and reliability, making it suitable for a wide range of applications.
The GPS-310FS receiver works by using a low-noise, wide-band RF (radio-frequency) front end to capture the signal. The signal is then amplified and filtered to allow it to be passed to the baseband processor. The processor then converts the signal into a digital format to be used by the navigation system.
This type of receiver has a wide range of applications. It can be used in navigation for land, air and sea vehicles, as well as for tracking, precision timing and surveying. GPS-310FS can also be used in telecommunications, for data broadcasting, for location-based services and for asset tracking.
The working principle of the GPS-310FS receiver is relatively simple. The antenna receives the radio-frequency signal from the satellite. Then, it is passed to a low-noise amplifier and filter. The amplifier and filter are used to reduce the level of the noise in the signal and also to reduce the bandwidth of the signal.
Once the signal has been filtered and amplified, it is then passed to a frequency down converter. The down converter is used to reduce the modulation frequency of the signal. This is done by shifting the signal’s frequency down to a lower level, so that the signal can be easily manipulated by the baseband processor.
The baseband processor is then used to convert the signal into a digital format. This allows the navigation system to process the signal. Once the navigation system has processed the signal, it can be used to calculate the position of the vehicle or device.
The GPS-310FS RF Receiver is a high-performance and reliable system that is used in a variety of applications. It is able to capture and process continuous signals, such as those from satellite navigation systems. The receiver is also used in telecommunications, for data broadcasting, for location-based services and for asset tracking. Its working principle is relatively simple and involves the capturing of the signal with a low-noise, wide-band RF front end, which is then amplified and filtered before being passed to the baseband processor. The processor then converts the signal into a digital format for use by the navigation system.
The specific data is subject to PDF, and the above content is for reference
Multi-band GNSS receiver with nanosecond...
High-performance LEA-6 series GPS module...
Simultaneous reception of GPS / QZSS, GL...
LEA-M8S module can receive up to 3 GNSS....
High-performance u-blox 6's LEA-6 se...
High-performance u-blox 5 LEA 5 series G...