GSIB2060-E3/45

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The GSIB2060-E3/45 is a diode bridge rectifier designed for general purpose power supply applications. It is a four-phase rectifier with a maximum current rating of 20 A and a peak forward voltage drop of 1.6 V. The device is designed using advanced silicon epitaxial technology and consists of two bridges in a single package. The rectifier offers excellent thermal characteristics and low power losses. Additionally, the device is RoHS compliant.

A diode bridge rectifier is a type of power supply circuit that converts alternating current (AC) to direct current (DC) by rectifying the AC input into a series of pulses. The bridge rectifier utilizes a set of four diodes connected in a bridge configuration to form a full-wave rectifier. This rectifier takes advantage of the fact that both halves of an AC cycle are of equal magnitude, but opposite polarity. This allows both parts of the alternating voltage to be used, rather than just one, with the diodes carrying current either left or right.

The GSIB2060-E3/45 is a full-wave rectifier with a wide forward voltage drop range up to 1.6 V. The device has an average control current of 4 A and a peak reverse current of 10 A. It utilizes an efficient planar design that helps reduce losses due to heat absorption and reverse voltage leakage. Additionally, the rectifier has a 1500 V breakdown voltage for enhanced power conversion.

The device can be used for various applications, including motor controls, welding, and artificial current sources. It is particularly useful for applications that need high surge current capability. Additionally, it is suitable for snubber circuits and relay drivers. It is also used to power LCDs and plasma displays.

In applications like AC-to-DC conversion, the GSIB2060-E3/45 rectifier can be used to convert AC to DC by passing the AC current through the bridge and then through a filter network to remove any remaining AC components. After this, the DC is ready to drive DC motors, charge batteries, and other all electrical circuits.

The bridge rectifier can also be used for power factor improvement, where it can be used to reduce the AC current required for a given load. This is especially beneficial in applications where AC loads are significant and the power factor is low.

Overall, the GSIB2060-E3/45 is a highly reliable, efficient, and robust diode bridge rectifier with a wide range of specifications and features. It is a great choice for power supply, motor control, and snubber circuits. It enables high current handling capability with low losses, enabling improved performance and cost savings.

The specific data is subject to PDF, and the above content is for reference