GSIB2520-E3/45

Series:	--
Packaging:	Tube
Part Status:	Active
Diode Type:	Single Phase
Technology:	Standard
Voltage - Peak Reverse (Max):	200V
Current - Average Rectified (Io):	3.5A
Voltage - Forward (Vf) (Max) @ If:	1V @ 12.5A
Current - Reverse Leakage @ Vr:	10µA @ 200V
Operating Temperature:	-55°C ~ 150°C (TJ)
Mounting Type:	Through Hole
Package / Case:	4-SIP, GSIB-5S
Supplier Device Package:	GSIB-5S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Bridge rectifiers are diode circuits made of four diodes arranged to convert an alternating current (AC) to direct current (DC). The bridge rectifier GSIB2520-E3/45 is no exception. It is designed to provide full wave rectification with 25A forward current and 20A instantaneouse reverse voltage. GSIB2520-E3/45 is mostly used in power supplies such as television, computers, control systems and air conditioners. It is also used in automotive and industrial applications to provide the direct current needed to operate the various components of the system. Bridge rectifiers are used when the power in the device has to be very precise and accurate, such as in charging circuits, solar panels and inverters. They are specifically designed to be robust and dependable in high-powered applications, making them popular in the industrial sector.A bridge rectifier circuit works by combining four diodes and a load resistor to create a full wave rectifier circuit. The basic principle is that the four diodes are arranged in the form of a bridge, which allows current to flow from both directions, from the positive to the negative and vice versa. When the AC voltage is applied to the circuit, the diode that connects the positive and negative terminals will be the first to conduct, and the diode on the opposite side of the circuit will be the last to conduct. This alternating current ‘ripples’ through the circuit, which is then converted into a pulsing direct current (DC) of varying amplitude. The output of the circuit is smooth and consistent and can be used to power devices that require a constant voltage or current. The primary advantage of the GSIB2520-E3/45 is its efficiency. It converts up to 97 percent of the AC power into DC power with minimal heat loss, which reduces power consumption and therefore costs for the end user. The metal housing acts as a heat sink and helps to dissipate heat from the load resistors, ensuring that the bridge rectifier remains cool even under high loads and high current. However, the bridge rectifier also has some disadvantages. The frequency of the output current is limited to the frequency of the input voltage, making the bridge rectifier unsuitable for applications that require variable frequencies. Additionally, the peak output voltage is typically lower than the peak input voltage, making it unsuitable for powering high-voltage circuits. The GSIB2520-E3/45 is a reliable and efficient bridge rectifier with a metal housing that is designed to dissipate heat and provide consistent power. It is used in a variety of applications, including power supplies, charging circuits, solar panels and inverters. The drawback of the bridge rectifier is that it is limited to the frequency of the input voltage and the output voltage is typically lower than the peak input voltage. However, it is still a popular component in the industrial sector due to its robustness and reliability.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description