GT1-OD16DS-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

GT1-OD16DS-1 is an accessory which is widely used in industrial, commercial, residential, or even military applications. It\'s a solid state relay, consisting of four components: the input control section, the output control section, the electrical switching section, and the physical housing. It\'s designed for use with AC (Alternating Current) loads, and is suitable for controlling motors, pumps, transformers, heaters, or other power-operated equipment.

The GT1-OD16DS-1 has an input control section and an output control section. The input control section accepts an input signal (typically from a digital controller or computer) which controls the operation of the relay. The output section is responsible for controlling the output load, either by switching on or off the supply voltage to the load. The relay has two output circuits that can be switched up to 16A at 240VAC.

In order to work properly, the GT1-OD16DS-1 must be correctly connected to both the input signal source and the output load. A short jumper wire is used to connect between the input and output terminals on the relay. The output terminals are then connected to the load, while the input terminals are connected to the control source. For optimum performance, the connection wiring should be kept as short as possible.

The electrical switching section of the relay is an electronic semiconductor device, typically a transistor or thyristor. This switching device can be triggered by a signal from the input control section. When triggered, the switching device conducts current through the load, allowing it to do its job. The state of the switch is monitored and kept in memory so that the output will remain on even if the input signal is lost.

The physical housing of the relay consists of several layers of insulation to protect the switch from internal heat generated due to the high current. The housing also helps control the temperature rise within the relay. The housing of the relay also provides mechanical protection against accidental damage or dropping.

In summary, the GT1-OD16DS-1 is an accessory used for controlling AC loads in industrial, commercial, residential, or military applications. It has an input control section and an output control section. The switching section is an electronic semiconductor device, and the physical housing helps protect the relay from heat and accidental damage. The GT1-OD16DS-1 can be used to control motors, pumps, transformers, heaters, or other power-operated equipment, and can switch up to 16A at 240VAC.

The specific data is subject to PDF, and the above content is for reference