GX-3S-R-C5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Proximity sensors are widely used in industry today. They detect proximity or presence of an object in a certain range without physical contact. The GX-3S-R-C5 proximity sensor is an example of a sensor used for this function.

The GX-3S-R-C5 sensor is a highly reliable sensor with a long life expectancy. The sensor has a built in current-voltage converter to give a consistent output even when the supply voltage varies. It also has a built-in protection circuit to protect against electromagnetic noise. The output of the sensor is a change in voltage level.

The GX-3S-R-C5 sensor can be used for a variety of applications including perceiving the presence of a person, detecting the approach of a vehicle, measuring the distance between two objects, or any other distance measurement that needs to be undertaken. It can also be used to detect the position of a target, detect the shape of an object and detect the size of an object.

The working principle of the sensor is electrically driven. The sensor has a highly sensitive electro-magnetic coil that creates a field around itself when current is sent through it. When an object is placed in or near this field, it causes the field to couple onto it. This induces a current in the object which is then measured by the sensor.

The GX-3S-R-C5 proximity sensor uses two different sensors to measure the induced current. One is a Hall Effect sensor and the other is an impedance-type sensor. Both of these sensors measure the changes in induced current that occur when an object is placed close to the sensor. The Hall Effect sensor will give a direct reading of the change in induced current while the Impedance sensor will give an indication of the change in induced current but also indicate any changes in resistance.

The Hall Effect sensor is usually the most accurate of the two sensors and is used in applications that require highly accurate measurements. The Impedance sensor is better suited for applications that require less accuracy, but can still accurately measure proximity.

The GX-3S-R-C5 sensor is able to detect objects in a range of 0 to 5 meters (roughly 1/4 inch to 16 feet). It also has a high degree of accuracy up to a few millimeters. It is able to measure the presence of an object even if it is moving, vibrating, or being distorted. This makes it useful for any application where an object\'s position needs to be monitored such as robotics or security systems.

To use the GX-3S-R-C5 sensor, the user must connect the power supply to the sensor, and then connect the output signal to the measuring device. The sensor will then be ready to use. The sensor should be calibrated periodically to make sure it is working correctly. This calibration should be done by following the instructions included with the sensor, as improper calibration could result in incorrect readings.

The GX-3S-R-C5 proximity sensor is an ideal choice for any application that requires accurate and reliable measurement of the presence of an object. It is simple to install and use, and can be used for a variety of applications. With its long life and high accuracy, it is a great choice for any proximity sensing requirements.

The specific data is subject to PDF, and the above content is for reference