H11A5SVM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electronic components which are designed to isolate a low-voltage circuit from a higher voltage or power circuit. Optoisolators with a transistor, photovoltaic output, also known as H11A5SVM, use a light source which produces a current through the photovoltaic diode when exposed to a light source. This current triggers the transistor, which then allows the control of the higher voltage and power circuit.

These optoisolators are typically used as a way to isolate control circuits from power circuits, or circuits of different voltage levels. The input of the optoisolator is a light source, which turns on the output transistor when exposed to the light source. The output of the optoisolator in this case is a transistor. When the transistor is on it can be used to turn on, off, or control specific devices.

H11A5SVM optoisolators typically operate off of a current of around 5mA, although exact working voltages and currents will vary depending on the optoisolator model. The typical response time of the optoisolators is about 2μs. Similarly, the transistor response time is typically about 8μs.

One of the primary applications of H11A5SVM optoisolators is in the control of high-voltage and power circuits. The transistor output makes it possible to achieve fast and accurate switching of high voltages and currents. This makes it ideal for a variety of applications including AC motor control, solar inverter control, and machine control.

Another important application of H11A5SVM optoisolators is in protecting sensitive circuits from potential malfunction and overloads. To do this, a device like a H11A5SVM can be placed between the power source and the circuit, allowing the circuit to be switched off when it is overloaded or is about to malfunction. This way, the power source is shut off before the circuit is subjected to high currents.

H11A5SVM optoisolators are also widely used in communication applications. Their fast switching capability makes them ideal for applications in which rapid and accurate signal transmission is required, such as for fiber optic communication and communication between connected devices. The optoisolator is used to transmit signals between the devices, and in some cases can also act as a signal amplifier.

Overall, H11A5SVM optoisolators are capable of providing great isolation between circuits of different voltage levels, and between power sources and sensitive circuits. Their fast response time, low current consumption, and transistor output make them ideal for a range of power and communication applications.

The specific data is subject to PDF, and the above content is for reference