H11N2SR2VM Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Logic Output

Optoisolators provide an electrical isolation barrier between two stages of electronic circuitry that may be operating at different potentials and may be subject to interference from one another. The H11N2SR2VM is a special type of optoisolator known as a logic output optoisolator. It operates with a logic output signal, which provides an electrical logic “high” or “low” state for the connection or disconnection of one or more systems.

The H11N2SR2VM is a 6-pin optoisolator module with a Schmitt trigger input voltage of 0.2 to 10V DC. It has an LED light source which is optically coupled to an integrated circuit detector. The LED emits light in response to the logic input voltage which then triggers the IC detector, allowing it to function as a switch to change the logic signal output.

The H11N2SR2VM operates with both active-high and active-low logic outputs. In an active-high logic output application, the logic input voltage must reach a specific threshold to turn the LED on and trigger the detector, and then the logic output voltage will be a logic “high” signal when the LED is on. Similarly, in an active-low logic output application, the logic input voltage must reach a certain threshold to turn the LED off and trigger the detector, and then the logic output voltage will be a logic “low” signal when the LED is off.

The H11N2SR2VM optoisolator has a wide range of applications in the electronics industry. It is commonly used in communication systems, sensor networks, medical equipment, robotics, and automotive systems. It can be used to replace mechanical relays in a variety of applications where fast switching speed and high noise immunity is required. It can also be used in PLCs, signal isolators, SCR controllers, and HVAC systems to provide electrically isolated connections.

The H11N2SR2VM is designed to provide superior performance, with an up to 5KVrms isolation voltage, a low turn-on current of 0.5mA and an input current of only 4uA, and a fast switching speed of up to 25kHz. It is also very robust, with an operating temperature range of -40 to +85C, and a storage temperature range of -40 to +125C.

In summary, the H11N2SR2VM is a special type of logic output optoisolator designed to provide electrical isolation between two systems. It is widely used in the electronics industry for fast switching applications, where it can provide high noise immunity and superior performance. It also has a wide operating temperature range and a high isolation voltage, making it well-suited for a variety of applications.

The specific data is subject to PDF, and the above content is for reference