H25E-F45-SB-10000-T5-ABZC-28V/V-SM18-S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Encoders: H25E-F45-SB-10000-T5-ABZC-28V/V-SM18-S

Encoders are actuators that convert the movement of a machine shaft into digital or analog signals, representing angular position, linear displacement and velocity. They are used to measure the motion of motors, pumps and machine tool spindles, as well as many other motion related applications. The H25E-F45-SB-10000-T5-ABZC-28V/V-SM18-S encoder is a general purpose absolute encoder suitable for many applications.

Application Field

H25E-F45-SB-10000-T5-ABZC-28V/V-SM18-S encoders are applied to an extensive range of motors, from larger servos to small motors. Some common applications include: speed measurement; shaft angle position feedback; and rotary feedback control. Additionally, they are compatible with virtually any control system, including but not limited to, PLCs, robots, hydraulic valves, servo motors, and more.

H25E-F45-SB-10000-T5-ABZC-28V/V-SM18-S encoders are also used in medical applications, such as radiation therapy equipment, dental X-rays, and imaging technologies. These devices are used to control and monitor the motor motion which enables precise positioning. The encoder can be used to supply feedback on the position and speed of the motor, thus allowing for precise control and accurate measurements.

Working Principle

The H25E-F45-SB-10000-T5-ABZC-28V/V-SM18-S encoder works by detecting a set of markings on a rotating disc or strip called a scale. The scale is attached to the motor shaft and the encoder reads the markings as they pass a sensing element. The encoder then converts the structural configuration into a digital or analogue signal that can be used by a controller.

The encoder uses two main components – the sensor and the scale. The sensor is responsible for sensing the markings and generating the signals, whilst the scale is responsible for providing discrete reference positions. Depending on the type of encoder, the scale can be a disc or a linear strip. In either case, the markings on the scale are selected to match the output required from the encoder.

H25E-F45-SB-10000-T5-ABZC-28V/V-SM18-S encoders use a sensing element that is sensitive enough to detect the coded signal as the scale rotates. The sensing element is typically an optical unit, a capacitive element or a magnetic pickup. Once the signal is sensed, the encoder will calculate the amount of rotation and output a digital or analogue signal depending on the type.

Conclusion

The H25E-F45-SB-10000-T5-ABZC-28V/V-SM18-S encoder is a general purpose absolute encoder that is suitable for many applications. It is used to measure the motion of motors, pumps and machine tool spindles, as well as many other motion related applications. The encoder works by detecting a set of markings on a rotating disc or strip, which are then converted into digital or analogue signals that can be read by a controller.

The specific data is subject to PDF, and the above content is for reference