H2MXS-1036M

Pitch - Cable:	0.050" (1.27mm)
Contact Finish Thickness:	--
Contact Finish:	Tin
Cable Termination:	IDC
Usage:	Socket (0.1"), Board In
Shielding:	Unshielded
Color:	Multiple, Ribbon
Features:	--
Length:	3.00' (914.40mm)
Series:	--
Pitch - Connector:	0.100" (2.54mm)
Number of Rows:	2
Number of Positions:	10
Moisture Sensitivity Level (MSL):	--
Connector Type:	DIP to Cable
Lead Free Status / RoHS Status:	--
Part Status:	Discontinued at Digi-Key

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Rectangular (or flat) cable assemblies have been around for many decades and are widely used in a variety of applications. One such assembly is the H2MXS-1036M, a high frequency, high power coaxial cable assembly used for RF and microwave applications. This article will discuss the application field and working principle of the H2MXS-1036M as well as provide an overview of how it is constructed and used.

Application Field

The H2MXS-1036M is a low loss, high frequency, high power coaxial cable assembly designed for use in a wide variety of applications including communications, military, and radar systems. It is suitable for use in applications with frequencies up to 18GHz, power up to 15W, and high impedance systems up to 300 Ohms. The H2MXS-1036M is also highly durable and can withstand the harsh environments and vibration levels often encountered in these types of applications.

Structure and Working Principle

The H2MXS-1036M is a semi-rigid coaxial cable that is constructed of a 0.036-inch-diameter, silver-plated copper center conductor with a PTFE dielectric and aluminum-bonded, one-piece, round-wire-braided outer conductor. The center conductor is connected to the outer conductor via a small crimp or removable straight connector with an impedance of 50 Ohms. The cable assembly has an optimized RF shield for excellent signal performance, a built-in strain relief, and a Kapton sheath for protection against temperature and environmental conditions.The working principle of the H2MXS-1036M is quite simple. The assembly acts as a conduit for electrical signals, allowing them to pass freely through the coaxial cable. The dielectric and outer conductor act as insulators, which minimize signal loss due to radiant energy and impedance mismatches. The shield of the cable assembly also provides excellent protection against EMF interference from external sources.

Conclusion

The H2MXS-1036M is a high frequency, high power coaxial cable assembly designed for use in a wide variety of applications including communications, military, and radar systems. It is suitable for use in applications with frequencies up to 18GHz, power up to 15W, and high impedance systems up to 300 Ohms.The assembly is constructed of a 0.036-inch-diameter, silver-plated copper center conductor with a PTFE dielectric and aluminum-bonded, one-piece, round-wire-braided outer conductor. The center conductor is connected to the outer conductor via a small crimp or removable straight connector with an impedance of 50 Ohms. The working principle of the H2MXS-1036M is quite simple, as it acts as a conduit for electrical signals, allowing them to pass freely through the coaxial cable, and providing excellent protection against EMF interference from external sources.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description