H413R3BYA

Series:	Holco, Holsworthy
Packaging:	Bulk
Part Status:	Active
Resistance:	13.3 Ohms
Tolerance:	±0.1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Pulse Withstanding
Temperature Coefficient:	±15ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.146" Dia x 0.394" L (3.70mm x 10.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

A through hole resistor is a type of resistor that uses a cylindrical body with metal end caps that penetrate a PCB (Printed Circuit Board). It is different from other types of resistors because the connection is made via holes instead of surface mount technology. This type of resistor is typically used in applications where it can protect other components from excessive current. It is also used to provide a ground connection between two components, or when a resistor must be placed very close to other components.

The most common use for a through hole resistor is in applications where the resistor needs to be placed in close proximity to other components. This is usually done to provide a ground connection between components. In addition, through hole resistors are often used in applications where the power needs to be separated, such as those involving RF (Radio Frequency) and microwave electronics, or in applications where the voltage needs to be regulated. They are also used in power supplies, as voltage regulators. Finally, through hole resistors are used in high-speed switching circuits, due to their high switching speed and noise suppression.

The working principle of a through hole resistor is quite simple. When a voltage is applied, the resistance of the resistor will increase, preventing current from passing through it. This is done by creating a tiny hole in the center of the resistor that allows current to flow through. The resistor is designed in such a way that it allows a certain amount of current to pass through while preventing an excessive current from passing. This is done by placing a thin metal film between the holes in the resistor, creating an electrical “barrier” that prevents excessive current from passing.

The most common type of through hole resistor is the wire-wound resistor. This type of resistor consists of a metal coil that is wound around a cylindrical body. This metal coil is usually made of copper or aluminum and is designed to create a precise resistance value. Another type of through hole resistor is the film resistor, which consists of a thin film placed between two metal end caps that is designed to create a specific level of resistance. This type of resistor is usually used in applications such as power supplies, as well as RF and microwave electronics.

Through hole resistors provide a great solution for a wide variety of applications. They are simple to use, reliable, and offer a great deal of flexibility in terms of what they can be used for. In addition, through hole resistors are cost effective and easy to manufacture, making them an ideal choice for many applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description