H43K24BCA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are easily recognized by the cylindrical shape of their body, which facilitates their insertion into the PCB. H43K24BCA is one type of through hole resistors, and it has a specific application field and a certain working principle.

The H43K24BCA is configured to be able to provide regulated, highly stable power supply voltages at current outputs of up to 24V. Its applications extend to numerically controlled machines, electical machines as well as autocontroll systems. It mainly consists of a charge pump, solenoid driver, and low-gain amplifier with voltage-doubler.

The main principle of working relies on the operation of the charge pump. The charge pump works with the three capacitors that are placed at the input, thus allowing the H43K24BCA to transduce a voltage ratio of 12V:24V without the need of an external switch-mode power supply or a switchboard. The three capacitors form a high-impedance charge-pump loop, where the 12V voltage is converted to 24V by a boost factor. The current supplied by the H43K24BCA is limited to 24V, meaning that it can power outputs ranging from 0.10 to 4.02V.

Apart from the charge pump, the H43K24BCA is also equipped with a solenoid driver. This driver is responsible for the on/off of the device, and allows devices to be triggered using any external source. Depending on the type of device connected to the H43K24BCA, it can be used to provide a wide range of current outputs. For example, for an automotive starter, it can be used to control the current up to 24V. In addition, it is equipped with an amplifier that remain in a standby mode until the device is triggered.

In summary, the H43K24BCA is a through hole resistor with a specific application field and a certain working principle. It mainly consists of a charge pump, solenoid driver, and low-gain amplifier with voltage-doubler. The charge pump works with the three capacitors that are placed at the input, allowing it to transduce a voltage ratio of 12V:24V without the need of an external switch-mode power supply or switchboard. The solenoid driver is responsible for the on/off of the device, and the amplifier remain in a standby mode until the device is triggered. Thus, it is able to provide regulated, highly stable power supply voltages at current outputs of up to 24V.

The specific data is subject to PDF, and the above content is for reference