Allicdata Part #: | H445K3BDA-ND |
Manufacturer Part#: |
H445K3BDA |
Price: | $ 0.51 |
Product Category: | Resistors |
Manufacturer: | TE Connectivity Passive Product |
Short Description: | RES 45.3K OHM 1/2W 0.1% AXIAL |
More Detail: | 45.3 kOhms ±0.1% 0.5W, 1/2W Through Hole Resistor ... |
DataSheet: | H445K3BDA Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.46438 |
Series: | Holco, Holsworthy |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 45.3 kOhms |
Tolerance: | ±0.1% |
Power (Watts): | 0.5W, 1/2W |
Composition: | Metal Film |
Features: | Pulse Withstanding |
Temperature Coefficient: | ±25ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.146" Dia x 0.394" L (3.70mm x 10.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The H445K3BDA is a type of through hole resistor that has a variety of widespread applications and is widely used in electronic circuits. It is designed to be a reliable and economical choice for using in a wide range of applications. The H445K3BDA is a three pin device with a ceramic or epoxy encapsulation. It is designed for low-power applications and is a cost-effective solution for low power, surface-mount applications.
The H445K3BDA is a fixed resistor, meaning that the resistance remains constant, regardless of the voltage or current applied to it. The H445K3BDA has a temperature coefficient of 0.25 percent/°C, which is within the acceptable range for most low-power applications. Furthermore, the device has a maximum load-carrying capacity of 75mA, and is also configured with reverse voltage protection.
The H445K3BDA through hole resistor is used in a wide range of applications, including medical equipment, electronic instrumentation, and automotive components. In these applications, the H445K3BDA is known for providing reliable performance, as well as increased reliability in challenging environments. The device is also commonly used in low-power lighting systems, consumer electronics, and power supplies.
The working principle of the H445K3BDA is based on Ohm’s Law, which states that the current through a resistor is directly proportional to the voltage applied across it. The resistance of the H445K3BDA is determined by the geometry of the device, as well as its physical characteristics. The device works by providing a precise resistance value through the use of metal oxide film as the active resistive component.
When used in an electrical circuit, the H445K3BDA functions to control the amount of current that flows through the circuit. This is accomplished by increasing or decreasing the resistance value of the device in accordance with the voltage applied to it. This is known as ‘voltage regulation’ and is important for controlling the performance of electronic circuits. The device can also be used to protect the circuit from over-voltage, short-circuiting, and surge voltages.
The H445K3BDA through hole resistor is a reliable, cost-effective solution for low-power surface-mount applications due to its wide range of applications and reliable performance. It is also designed with reverse voltage protection for added reliability. In addition, the device has a temperature coefficient of 0.25 percent/°C, which makes it suitable for use in a variety of applications. Lastly, its resistance can be adjusted according to the voltage applied to it, allowing for precise voltage regulation in electronic circuits.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
H4453KBDA | TE Connectiv... | 0.51 $ | 1000 | RES 453K OHM 1/2W 0.1% AX... |
H445R3BDA | TE Connectiv... | 0.51 $ | 1000 | RES 45.3 OHM 1/2W 0.1% AX... |
H4453RBDA | TE Connectiv... | 0.51 $ | 1000 | RES 453 OHM 1/2W 0.1% AXI... |
H445K3BDA | TE Connectiv... | 0.51 $ | 1000 | RES 45.3K OHM 1/2W 0.1% A... |
H445R3BYA | TE Connectiv... | 0.57 $ | 1000 | RES 45.3 OHM 1/2W 0.1% AX... |
H4453RBYA | TE Connectiv... | 0.57 $ | 1000 | RES 453 OHM 1/2W 0.1% AXI... |
H445K3BYA | TE Connectiv... | 0.57 $ | 1000 | RES 45.3K OHM 1/2W 0.1% A... |
H4453KBYA | TE Connectiv... | 0.57 $ | 1000 | RES 453K OHM 1/2W 0.1% AX... |
H445R3BCA | TE Connectiv... | 0.48 $ | 1000 | RES 45.3 OHM 1/2W 0.1% AX... |
H4453RBCA | TE Connectiv... | 0.48 $ | 1000 | RES 453 OHM 1/2W 0.1% AXI... |
H445K3BCA | TE Connectiv... | 0.48 $ | 1000 | RES 45.3K OHM 1/2W 0.1% A... |
H4453KBCA | TE Connectiv... | 0.48 $ | 1000 | RES 453K OHM 1/2W 0.1% AX... |
H445R3BZA | TE Connectiv... | 0.41 $ | 1000 | RES 45.3 OHM 1/2W 0.1% AX... |
H4453RBZA | TE Connectiv... | 0.41 $ | 1000 | RES 453 OHM 1/2W 0.1% AXI... |
H445K3BZA | TE Connectiv... | 0.41 $ | 1000 | RES 45.3K OHM 1/2W 0.1% A... |
H4453KBZA | TE Connectiv... | 0.41 $ | 1000 | RES 453K OHM 1/2W 0.1% AX... |
H445 | Klein Tools,... | 15.04 $ | 1000 | SHEARS ADJUSTABLE TENSION |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...