H4464RBCA

Series:	Holco, Holsworthy
Packaging:	Bulk
Part Status:	Active
Resistance:	464 Ohms
Tolerance:	±0.1%
Power (Watts):	0.5W, 1/2W
Composition:	Metal Film
Features:	Pulse Withstanding
Temperature Coefficient:	±50ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.146" Dia x 0.394" L (3.70mm x 10.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Through Hole Resistors

Through hole resistors are also known as through-hole mounted resistors and are the most widely used type of resistor. A through-hole resistor is a simple, low-cost electronic component, which is usually composed of either a carbon film, metal oxide layer or a wirewound element. This type of resistor consists of two leads that extend through holes in a circuit board. The distance between the two leads can vary and is usually dependent on the intended application. The purpose of this type of resistor is to limit the current flowing through a circuit, while providing an adjustable voltage drop.

H4464RBCA Application Field

The H4464RBCA is a type of through hole resistor manufactured by Vishay Intertechnology, Inc. It is designed for use in a wide variety of applications. Due to its low cost and high reliability, the H4464RBCA is well suited to any industrial or consumer product which requires a through-hole resistor.The H4464RBCA is a three-terminal, isolatable resistor with an isolation rating of 4500 volts. This makes it ideal for applications in high voltage systems. It is also suitable for use in audio amplifiers. Its silicone coating makes it dust and moisture proof, ensuring long-term durability and performance.The H4464RBCA is available in a wide range of values from 0.1Ω to 10MΩ. It has a wide temperature range of -55°C to +125°C and is available in tolerance levels from ±0.01%. It is also RoHS Compliant, making it an ideal choice for many applications.

H4464RBCA Working Principle

The working principle of the H4464RBCA is based on the well-known Ohm’s law. This law states that the current in a circuit is equal to the voltage across it divided by the resistance. In the case of a resistor, the resistance is constant and so the current is dependent on the voltage.The H4464RBCA resistor works by limiting the amount of current that is allowed to flow through a circuit. This is done by using the resistance of the resistor to reduce the voltage across it. As the voltage is reduced, the current is also reduced, thus protecting the circuit from excessive current.The H4464RBCA has a three terminal design, which allows it to be used in different types of circuits. The first two terminals are used to connect the resistor to the power source and the last one is used to connect it to the load. The resistor can be used in series with the load or in parallel with it to provide the desired degree of resistance.

Conclusion

A through hole resistor is a simple, low-cost electronic component which is used in a wide variety of applications. The H4464RBCA is one such type of resistor which is designed specifically for use in high voltage and audio amplifier applications. It is a dust and moisture proof resistor with a three-terminal design, a wide range of values and a wide temperature range. The working principle of the H4464RBCA is based on Ohm\'s law and it is used to limit the current that is allowed to flow through a circuit.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description