Allicdata Part #: | H452K3BCA-ND |
Manufacturer Part#: |
H452K3BCA |
Price: | $ 0.48 |
Product Category: | Resistors |
Manufacturer: | TE Connectivity Passive Product |
Short Description: | RES 52.3K OHM 1/2W 0.1% AXIAL |
More Detail: | 52.3 kOhms ±0.1% 0.5W, 1/2W Through Hole Resistor ... |
DataSheet: | H452K3BCA Datasheet/PDF |
Quantity: | 1000 |
250 +: | $ 0.43862 |
Series: | Holco, Holsworthy |
Packaging: | Bulk |
Part Status: | Active |
Resistance: | 52.3 kOhms |
Tolerance: | ±0.1% |
Power (Watts): | 0.5W, 1/2W |
Composition: | Metal Film |
Features: | Pulse Withstanding |
Temperature Coefficient: | ±50ppm/°C |
Operating Temperature: | -55°C ~ 155°C |
Package / Case: | Axial |
Supplier Device Package: | Axial |
Size / Dimension: | 0.146" Dia x 0.394" L (3.70mm x 10.00mm) |
Height - Seated (Max): | -- |
Number of Terminations: | 2 |
Failure Rate: | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
H452K3BCA through hole resistors are a type of electrical component used to restrict the flow of electrical current in a circuit. They are used in a variety of applications including regulated power supplies, signal processing, and digital circuits. They are commonly used in applications where accuracy and consistency are required, such as industrial control systems, laboratory equipment, and communications networks.
These resistors are composed of two terminals connected to a cylindrical body, or package, which is generally referred to as the resistor body. The terminals are usually connected to a printed circuit board (PCB) or other components. The resistor body is typically made of a ceramic or metal material. The two terminals on the outside of the package are intended to be electrically connected to the outside of the package. The contact points on the body are typically connected to the inside of the package. This allows for symmetrical electrical connections.
The resistance value of through hole resistors is generally fixed and predetermined. This is done by using an insulating material, usually non-conductive ceramic or porcelain, to create a certain resistance when current is passed through the resistor. This insulating material is often the same material that the resistor body is made of. The resistance value is predetermined by the manufacturer and is usually indicated on the resistor body with a number indicating Ohms or fractional Ohms.
Through hole resistors have several advantages over surface mount resistors, which makes them more desirable for certain applications. Since the resistor body is designed to be insulated from the circuit, they are not affected by heat. In addition, since the resistor body is connected to the PCB through the terminals, it is easier to secure the resistor than it is to secure its surface mount counterpart. Finally, through hole resistors are generally easier to troubleshoot and service, as they are much easier to locate than surface mount resistors.
Through hole resistors can be used for a variety of tasks, including voltage and current regulation, over-current protection, noise suppression, and impedance matching. They are used in devices such as power supplies, switching circuits, transducers, active filters, and amplifiers. They are also used in communications circuits to reduce noise and interference from external sources.
In addition to their means of providing resistance in a circuit, through hole resistors are also used to measure current or voltage in a circuit. This can be done using resistance measurements, such as Ohm\'s law. In this case, the resistor serves as a measurement device by creating a path of resistance between two points on the circuit. By measuring the current or voltage at these two points, the resistance of the resistor can be determined, which can then be used to calculate the voltage or current of the circuit.
Through hole resistors are one of the most essential components in circuit board assembly. They are reliable and stable, providing consistent performance in a variety of applications. By providing resistance, limiting current, suppressing noise, and measuring voltage or current, these resistors are vital to the successful operation of a circuit and its associated components.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
H4523KBDA | TE Connectiv... | 0.51 $ | 1000 | RES 523K OHM 1/2W 0.1% AX... |
H452R3BDA | TE Connectiv... | 0.51 $ | 1000 | RES 52.3 OHM 1/2W 0.1% AX... |
H4523RBDA | TE Connectiv... | 0.51 $ | 1000 | RES 523 OHM 1/2W 0.1% AXI... |
H452K3BDA | TE Connectiv... | 0.51 $ | 1000 | RES 52.3K OHM 1/2W 0.1% A... |
H452R3BYA | TE Connectiv... | 0.57 $ | 1000 | RES 52.3 OHM 1/2W 0.1% AX... |
H4523RBYA | TE Connectiv... | 0.57 $ | 1000 | RES 523 OHM 1/2W 0.1% AXI... |
H452K3BYA | TE Connectiv... | 0.57 $ | 1000 | RES 52.3K OHM 1/2W 0.1% A... |
H4523KBYA | TE Connectiv... | 0.57 $ | 1000 | RES 523K OHM 1/2W 0.1% AX... |
H452R3BCA | TE Connectiv... | 0.48 $ | 1000 | RES 52.3 OHM 1/2W 0.1% AX... |
H4523RBCA | TE Connectiv... | 0.48 $ | 1000 | RES 523 OHM 1/2W 0.1% AXI... |
H452K3BCA | TE Connectiv... | 0.48 $ | 1000 | RES 52.3K OHM 1/2W 0.1% A... |
H4523KBCA | TE Connectiv... | 0.48 $ | 1000 | RES 523K OHM 1/2W 0.1% AX... |
H452R3BZA | TE Connectiv... | 0.41 $ | 1000 | RES 52.3 OHM 1/2W 0.1% AX... |
H4523RBZA | TE Connectiv... | 0.41 $ | 1000 | RES 523 OHM 1/2W 0.1% AXI... |
H452K3BZA | TE Connectiv... | 0.41 $ | 1000 | RES 52.3K OHM 1/2W 0.1% A... |
H4523KBZA | TE Connectiv... | 0.41 $ | 1000 | RES 523K OHM 1/2W 0.1% AX... |
RES WW 7W 5% TH68 kOhms 5% 7W Through Ho...
RES WW 7W 5% TH1.3 Ohms 5% 7W Through Ho...
RES 24.9 OHM 1/4W 1% AXIAL24.9 Ohms 1% 0...
RES 2.8 OHM 3W 0.5% WW AXIAL2.8 Ohms 0.5...
RES 750K OHM 1/4W 1% AXIAL750 kOhms 1% 0...
RES 340 OHM 1W 1% WW AXIAL340 Ohms 1% 1W...